Condition: used, TECHNICAL DETAILS Fobvqsuhakho Rqnjgb - See photos

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, table height: 400 mm, pressing force: 500 t, table width: 5,500 mm, table length: 3,000 mm, TECHNICAL DETAILS Febvq Rqeu Iy Trensgb capacities Maximum force: 500 t Restoring force: 200 t Table dimensions: 5,500 x 3,000 mm Table stroke: 3,500 mm Table height above floor: 400 mm Extension speed of the table: 60 - 80 mm/s Stroke of the carriage: 1,800 mm Daylight opening: 2,000 mm Cushion dimensions: 3,960 x 1,860 mm Stroke of the upper cushion stop: 180 mm Cushion force: 100 t Fast return: 35 mm/s Electrical power: 380 V, 50 Hz Output: 59 kW EQUIPMENT PLC Siemens Bolster table with dimensions of 5,500 x 3,000 mm Cooling in the control cabinet CE marking

Year of construction: 2022, Condition: new, Double column press 300to (3000kN) at 245bar stroke 1000mm installation height 1200mm ram plate 1400mm x 1200mm table top 1400mm x 1200mm Rexroth hydraulics complete Siemens SPS feed 170mm/sec pressure phase 8 - 15mm return 150mm return 110mm/sec Main motor 30kW Fgjbvokw Rbdjq Rqneb

Year of construction: 1966, Condition: good (used), Machine number: 6665/66 TyP / Model: PEDV 10/II-S Pressing force: 10 t table: 450 x 300 mm ram: 190 x 140 mm ram stroke: 6 to 50 mm ram adjustment downwards: 45 mm table adjustment upwards: 140 mm drop-through hole: 140 mm throat: 170 mm distance table ram max.: 320 mm stroke rate: 160 /min sheet thickness single stroke: 2 mm sheet thickness continuous stroke: 1 mm power supply: 1,2 kW Fgebvq Rqjh Tktijnsb Accessories/equipment: Condition: good weight: 1,0 t dimensions: 900 x 850 x 2.200 mm

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm Fgobvecxxrreq Rqneb ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 150204, table length: 2,000 mm, table width: 1,000 mm, pressing force: 100 t, ram stroke: 300 mm, Automatic punching press with automation TECHNICAL DETAILS Total pressing force: 100 t Stroke: 300 mm Adjustment: 125 mm Stroke at bottom, adjustment at top: 600 mm Number of strokes: 10 - 50 min-¹ Control system: Siemens S7 Dimensions Fobvsu Unmqjq Rqnsgb Distance between the uprights L-R: 2,020 mm Distance between the uprights at the side: 620 mm Table clamping surface: approx. 2,000 x 1,000 mm Ram clamping surface: approx. 2,000 x 900 mm Opening in the table: 1,700 x 300 mm Table height above floor: 1,200 mm MACHINE DETAILS Power requirement: 39 kW Height above floor: approx. 4,400 mm Dimensions (L x W x H): 5,166 x 2,500 x 4,400 mm Machine weight: approx. 38 t EQUIPMENT - Electrical overload protection - Two-hand operation - Schleicher straightener: width 650 mm, max. thickness 2.0 mm - Wanzke decoiler: max. load 6 t - Helmerding feed: width 600 mm, thickness 0.6 - 6.0 mm

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Execution : * number of mounts : 2 - Fix table : * length : 210 [mm] * width : 210 [mm] - Press frame : fix - Hole in the table : diameter 80 [mm] - Number of punches : from 50 to 150 [p/min] Fgjbvq Rouhakbsqnsb - Adjustable slide : 40 [mm] - Fix travel : 27 [mm] - Max height for tooling : 148 [mm] - Passage through mounts - Longitudinal : 230 [mm] - Electric connection : 380 [Volt] - Total installed power : 0.75 [CV] - Weight : 640 [kg] - Floor space (length x depth x height) : 1100 x 1000 x 1500 [mm]

Condition: used, Year of construction: 1994, pressure:100 t throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm Febvot Hmk Heq Rqnsgb dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V weight of the machine ca.:4 t

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1200 x 1200 [mm] - Machine height : 2200 [mm] Fobvq Rqouhai Ronogb - Machine weight : 550 [kg] MACHINE HOURS - Working hours : 1070 [h]

Condition: used, Year of construction: 1978, pressure:300 t Fgebst Hmlkevq Rqnob stroke:88 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 450 mm table height over floor:790 mm passage to the back:480 mm ram surface:480 x 470 mm ram adjustment:40 mm power requirement:5,5 kW weight:8,4 t dimensions (WxDxH):2,0 x 1,6 x 3,3 m

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 75 [mm] - Max. approach speed : 315 [mm/s] - Slide stopping time : 50 [ms] LOWER EXTRACTOR - Diameter : 16 [mm] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] Fgjbeuhai Devq Rqnob FLOOR SPACE - Floor dimensions : 1300 x 1100 [mm] - Machine height : 1900 [mm] - Machine weight : 575 [kg] MACHINE HOURS - Working hours : 669 [h]

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm Fjbvq Rjfx Hv Heqnjgb hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, TECHNICAL DETAILS Febvq Rqsuhaikenjgb Same as on photos

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm no. of strokes:180 Hub/min table surface area:400 x 340 mm table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t Fgsbocxxygsvq Rqnjb dimensions of the machine ca.:1,2 x 1,5 x 2,0 m

Condition: used, TECHNICAL DETAILS Fgsbveuhaiqjq Rqnob Same as on photos

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar Febvq Rqsh Ra N Rensgb :43 kw weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m

Condition: used, TECHNICAL DETAILS Fgebvq Rqouhaiwjneb Same as on photos

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm Fsbvjcxxmfeq Rqnsgb total power requirement:7,5 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: used, TECHNICAL DETAILS Fgsbjuhah Tovq Rqnsb Same as on photos

Condition: used, Year of construction: 1989, plate width:150 mm no. of straightening rolls:4 Fgebvscxxvmjq Rqnsb number of draw-in rolls:2 vorne+ 2 hinten roll diameter:60 mm dimensions of the machine ca.:1,8 x 0,7 x 1,4 m all rollers driven and individually adjustable, positioning via digital counter display, with 2 each introduction roller cages right and left

Condition: used, TECHNICAL DETAILS Fobvqouhaide Rqnsgb Same as on photos

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] Fobvq Rouhahaeqnogb - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS - pressure : 5 [kN] Febvqouhagvs Rqnjgb - table dimensions : 115 x 70 [mm] - spindle diameter : 20 [mm] - work height : 40 [mm] - floor space : 115 x 175 x 290 [mm] - weight : 11 [kg]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] Fgjbvouhag Asq Rqnjb - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS Fgebvq Rsuhag Nsqnsb - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. thickness : 2 [mm] - Shocks per minute : 150 [H/min] - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]