Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Fpolranbeinzdljrog Without soundproof cabin and without conveyor system. Feed BBV 202/120

Year of construction: 2013, Condition: excellent (used), Punching force 80 kN working stroke 40 mm installation height 140 mm Fpelrelmk Uyeanbrog throat 110 mm Working pressure 10 bar Space requirement L x W x H 0.9 x 0.9 x 1.4 m Weight 250 kg Operating instructions

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 15914, TECHNICAL DETAILS Pressing force: 630 kN Installation height: max. 600 mm Fpslretwpggoanbrjg ram stroke: max. 400 mm throat depth: 280 mm Table height: 850 mm Table width: 630 mm Table depth: 500 mm Overtravel: 20 mm Overtravel time: 90 ms Safety distance: 180 mm MACHINE DETAILS Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil volume: 285 l Weight: 6000 kg Idle noise: 69.2 dB Drive power: 22 + 4 kW

Condition: used, Year of construction: 1978, Functionality: fully functional, TECHNICAL DETAILS Pressure: 300 t Stroke: 450 mm Overtravel: 26 mm Safety distance: 130 mm Table dimensions: 900 x 600 mm Felrastq Hzvenbrspg MACHINE DETAILS Dimensions: 1450 x 1720 x 2850 mm Machine weight: approx. 3500-4000 kg

Year of construction: 1974, Condition: used, machine/vehicle number: 82, Hydraulic frame press for sheet metal stamping with a force of 630 tons, designed for cold stamping. The vertical frame press with a welded construction consists of a table and an upper plate that are connected with screws. An electrical cabinet is installed next to the press and an oil overflow tank is located deep in the foundation, which facilitates filling the press system with oil. The pressing units are removable, which makes their assembly and repair easier. The press is controlled with a button. The size of the slider stroke is ensured by adjusting the position of the end stop. 1. Nominal pressing force, tone 630 2. Rated working pressure of fluids, KN/cm 2,200 3. Slide stroke, mm 750 4. Slider speed, mm/s a) at idle speed 215 b) during the working stroke 10 c) during the return stroke 120 5. The greatest distance between the table and the slider, mm 1400 6. Distance between posts, mm 2200 7. Table dimensions, mm a) from left to right 2220 b) front to back 1800 8. Thickness of stamping plate, mm 220 Fpelraopgkt Ssnbrsg 9. Table height above floor level, mm 410 10. Nominal force of the hydraulic washer, tf 250 11. Hydraulic cushion stroke, mm 350 12. Ejector speed, mm/s a) when going up 51 13. Press size, mm a) from left to right 5070 b) front to back 3000 c) height 7065 14. Press height above floor level, mm 5480 15. Weight of the press, kg 69400 Electric motor revolutions 1450 min-1 Operating voltage 400/230 V Mains frequency 50 Hz ± 1% Rated air pressure 0.7 Pa

Condition: good (used), Year of construction: 2007, operating hours: 75 h, Functionality: fully functional, total height: 2,000 mm, total width: 2,100 mm, outer dimension width: 600 mm, Press brake ENS for sheet metal up to 1.5n mm thickness, additional dies and rails up to 2000 mm. Fpslrou Au A Djanbrsg Working length up to 2000 mm, adjustable with various dies. Machine works hydraulically stepless with foot control. Electrical connection 400 V. This machine was manufactured especially for us.

Year of construction: 1981, Condition: excellent (used), UBE 800T ALUMINIUM EXTRUSION PRESS Yom: 1979/2008 Dimensions of recipient; - Diameter of 132mm x 560mm - Diameter of 127mm x 560mm - 90mm diameter x 555 mm Efficiency Fslranbeggrxcjrepg - Squeezing (maximum tonnage) at 210kg / cm2 800 M Ton - Squeezing (minimum tonnage) at 210kg / cm2 697 M Ton - Servo-side depth. the piston rod forward at 210kg / cm2 112 M Ton - Servo-side depth. rod return at 210kg / cm2 63 M Ton - Sealing recypient at 210kg / cm2 69 M Ton - Opening recypient at 210kg / cm2 94 M Ton - Puncture at 210kg / cm2 102 M Ton - Shift matrix at 210kg / cm2 12 M Ton

Condition: new, Year of construction: 2024, Functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Fpslranetmugcobrjg Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: used, Year of construction: 2009, Functionality: fully functional, The basic Müller machine was put into operation in 1972. In 2009 it was completely overhauled by the Dunkes company. You will receive further information by e-mail. Dismantling and collection must be carried out by the buyer. Sale without guarantee or warranty and return as it is a used machine. The press is in daily use and can be inspected. Fpjlraevb Hhlenbrsg

Condition: good (used), We offer Becker scrap metal packer, ready to work. Dimensions of the packet 40cm/40cm. Supply voltage; 3F˜380 V 50Hz Connection power; 75 kW motor Work cycle; 48 seconds Capacity; 8-10 tons/h Feed chamber 130cm x 200cm x 76cm (depth) Machine equipped with: - heaters for hydraulic oil, - oil cooling system, - hydraulic oil level sensor, - hydraulic oil temperature sensor, - remote control for remote operation in automatic mode, - panel for operation in manual mode, - counter for made packages, . Fpjlret Hfqfeanbrjg

Year of construction: 1992, Condition: used, machine/vehicle number: 530, The STEINER hydraulic press was manufactured and developed with practical aspects in mind. The hydraulic device is located on the hydraulic tank behind the press. Control blocks and valves are easily accessible from the outside and can be quickly replaced if necessary. The hydraulic radial piston pump is located on the drive console and is connected to the motor and pump mount via a coupling. The press stand is indestructible and torsion-resistant Sthal welded construction. The ironing board is screwed to the stand. The hydraulic cylinders are screwed to the press stand from above and guided through the mounting holes in the appropriate direction. The piston is connected to the piston rods via a wear ring. Four-sided, diagonal, flat grooves on the stand allow for very precise movement. Hydraulic cylinders are made of high quality material and are designed for high pressures. The piston rods are ground and hard chrome plated. The cylinder tubes are honed from the inside. Seals that have been maintained over many years are characterized by high quality and tightness. The piston rods are guided by guide bands, which are characterized by very low abrasion and a long service life. The control, control and monitoring devices for all control devices are installed in the control unit. Mutual locks ensure that no two program processes can run at the same time. The electrical control is located in a closed control cabinet. Pressing force - 8000 kN Operating pressure - 285 bar Installation height - 850 mm Stroke - 250 mm Table surface - 1550 x 1450 mm Ram surface - 1550 x 1450 mm Stand passage - 1800 mm Lateral Breakthrough in the stand on the right and left Width x height - 1300 x 1075 mm Table top thickness - 155 mm Width of the machine approx. - 3100 mm Depth approx. - 4300 mm Height approx. - 4660 mm Table height above hallway - 500 mm Table height under hallway - 755 mm Drive power - 55 kW Oil requirement approx. - 1400 liters Total weight approx. - 60 tons Folranepgktcsbrspg

Condition: used, Year of construction: 1959, operating hours: 33,610 h, Functionality: fully functional, stroke adjustment: 200 mm, overall weight: 3,000 kg, pressing force: 110 t, Used Weingarten screw press for sale. The machine runs cleanly, triggers reliably and has been serviced regularly. Maximum ram stroke: 300mm Folreuri Ufoanbrjpg Minimum ram stroke: 100mm Machine is cleaned and ready for use.

Year of construction: 2003, Condition: excellent (used), Powder compacting automatic press DORST DACS15 Yom: 2003 Mechanical high-efficiency automatic press Pressing force: max. 150kN Fpelsggrw Roranbreg Ejection force: 50kN Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min

Condition: new, Year of construction: 2025, Functionality: fully functional, Machine Model:HMG-200JM1815 1:Servo hydraulic motor 2:Magnetic table Specification: Fpolrjug T Rxsanbrog Clamping force: 2000KN Table size:1800*1500mm Maximum mold weight:20000 Kg Machine weight:32000kg Machine size:6200*2750*5800mm

Condition: good (used), Year of construction: 1994, operating hours: 590,000 h, Functionality: fully functional, total height: 4,600 mm, table height: 1,125 mm, installation height: 600 mm, total width: 3,500 mm, pressing force: 400 t, table width: 1,250 mm, table length: 1,240 mm, oil tank capacity: 3,400 l, Further pictures and technical data can be obtained by e-mail. Sale is ex location without guarantee and return. Dismantling and collection must be carried out by the buyer. We hand over the press free of media. Folranovb D Trjbrepg

Condition: good (used), We offer Riko S-26 parcel machine for scrap metal after renovation, ready to work. Package dimensions 30x30 cm. Supply voltage; 3F˜380 V 50Hz Connection power; 50 kW Work cycle; 45 seconds Capacity; 5-7 tons/hour Feed chamber; 120 cm x 135 cm x 66 cm (depth) Machine equipped with: - heaters for hydraulic oil, - oil cooling system, - hydraulic oil level sensor, - hydraulic oil temperature sensor, Fjlrajq H Sdkjnbrjpg - remote control for remote operation in automatic mode, - panel for operation in manual mode, - counter of made packages, - new hydraulic pumps, - new distributors, - new automation control system,

Condition: good (used), Year of construction: 1984, Functionality: fully functional, pressing force: 63 t, Press LEN63C + Feeder QPKP 250 Felou Nkfueranbrjpg

Condition: new, Kyori High-Speed-Press VX40-W with Siemens-Control Technical specification: tonnage: 400 KN drive: flywheel with dynamic balancer feeding direction: right to left color: Kyori white RAL 7035 position of main drive: right ram adjustement range: 50 mm shut height : 240 mm max. upper die weight: 180 kg safety doors: front and back tool load area light: 2 LED-lights bolster area (LxW): 950 x 600 mm bolster design: T-slot bolster material: steel bolster thickness: 120 mm base plate opening (LxW): 760 x 120 mm Fpslranbet Upvberog ram area (LxW): 950 x 450mm ram design: T-slot dimensions: 2120 x 1400 mm total height: 3170 mm weight: (approx.) 9.500 kg strip inlet height: has to be defined strip inlet width: max. 300 mm feed: Vamco SR-150

Condition: used, MULLER 250t Fjlranborfxhksrjpg PRESSURE: 250t STROKE: 550mm TABLE DIMENSIONS: 2500x1400mm

Year of construction: 1990, Condition: reconditioned (used), Hydraulic press - has 4 independent stroke / cylinders. Deep drawing process. Fpelrasgcvfnenbrsg Manufacturing of oil and fuel filters cans. The range of details is: Sheet thickness: 0.4-0.6 mm Material type - black or galvanized steel Can diameter: 68mm - 96mm Can length: 50mm - 180mm The entire control was replaced, including cabling, drivers, monitor, etc.

Condition: used, Year of construction: 2018, Functionality: fully functional, HPFS series are suitable for processing metal materials, such as stamping, bending, compressing and drawing metal sheet etc. It can also be used for straightening, pressing, plastic molding, balsa wood punching and sintered parts compacting. Nominal force 1000KN Max. working pressure of liquid 25Mpa Slider stroke 400mm Max. opening height 700mm Worktable size 1700 x 800mm Idle speed of slider 100mm/s Working speed od slider10-25mm/s Return speed of slider 30-80mm/s Height above floor 800mm Specification Unit Parameter Model No. HPHS-100T Nominal Pressure KN 1000 Return force KN 320 Slide Stroke mm 400 Max. Opening Height mm 700 Slider Speed: -Downstream speed mm/s 100 -Pressing mm/s 10-25 -Return mm/s 30-80 Table Size: -L.R. mm 1700 -F.B. mm 800 Overall dimensions: -L.R. mm 2300 -F.B. mm 800 Fpelranboquqc Iersg -Height above floor mm 3000 Servo motor Power KW 18.5 Voltage 400V, 50Hz, 3 Phase Total Weight app. T 12 Below attached drawing with tech. specification

Condition: reconditioned (used), Year of construction: 1983, Functionality: fully functional, Specification: Rated pressure 50 tons Slide stroke 7-80 mm Speed 75-300 strokes/min Slide adjustment 50 mm Table dimensions 500 x 500 mm Passage between columns 400 mm Weight 8500 kg Press equipped with mechanical jaw feeder - ELMEA PM132 - Year of production of the feeder: 2004. - For high speed and precision (0.02 mm) operation. - Speed up to 1000 strokes/minute for short feeds. - Acquires motion from the press shaft by driving a gear wheel with alignment joints. Rotary motion is converted to straight-alternative motion by a crank/crank system. - Adjustment of the feed length is achieved by an accurate step screw. - The clamp opening can be adjusted to accommodate belt thickness. It can also be set up for remote control operation. - It has an emergency stop sensor for hooking into the tool and is equipped with a kinetic joint that reduces the feeding angle from 180 to 120 or 90 degrees, increasing speed during feeding. Fpolstq Hqaeranbreg The press has been professionally refurbished by Service BTC Maszyny Stolarczyk - New touchscreen control panel and PILZ safety controller - New lubrication pump and hydraulic fuse - Warranty 6 months. - Location of the machine: 97-410 ZŁOBNICA, POLAND. - Ready for delivery.

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 turret press Technical data : - CNC control : FANUC 18 i-P - pressure : 20 Ton - max. punching format without interceptor and with 31 station head : 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of punched sheet with interceptor : 1020 x 2540 mm - max. size of punched sheet with capture + 1 turn (optional) : 1500 x 2540 mm - max. sheet thickness on ball table : 6 mm - max. thickness of sheet on brush table : 3 mm - max. permissible weight on table : 100 kg - punching accuracy : +-0.1 mm - positioning accuracy : +-0,07 mm - number of pneumatic clamps/grips : 2 - number of axes controlled simultaneously : 3: X, Y, C - turret speed : 25 rpm. - number of strokes per min, distance 25.4 mm, cylinder stroke 6.5 mm : 220 strokes/min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm : 480 strokes/min. - minimum programmable increment : 0.001 mm - number of tool stations - 31, including 3 rotary ones - max. tool diameter : 88,9 mm - rotary stations : 2x1 1/4"; 1x2" - max. sheet thickness for rotary station : 3 mm - slider : hydraulic - bottom feed feed turning point : 4 programmable points - working table : X=600, Y=400 - memory capacity : 64 (~63 programs) Kb - graphic screen : 10,4" LCD - stop time : 295 ms - air pressure : 5 kg/cm2 (bar) - air volume : 250 Nl/mn - oil amount : 160 L - light curtain (3 beams) : standard in European countries - installed power : 27 kW - machine dimensions : L=4460 mm, l=2750 mm, h=2130 mm - transport dimensions : L=4820 mm, l=2500 mm, h=2414 mm - weight of punching machine AMADA EUROPE 245 : 10 000 kg - time worked : 35 000 working hours Felranshvaaasbropg Production 2000.12 , installation 2001 1 szy owner , service book with full history of the machine, machine in perfect condition, worked on thin sheets Start-up warranty Training on operation included in the price. Contact person : Robert 500114006 Greetings

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 160/0/31/99, ram adjustment: 110 mm, table width: 1,250 mm, table length: 750 mm, stroke adjustment: 200 mm, overall weight: 13,800 kg, pressing force: 160 t, ram bore: 60 mm, warranty duration: 3 months, year of last overhaul: 2023, Equipment: documentation/manual, Procent Pressix eccentric press from 1999 after full modernization in 2023. Scope of renovation and modernization work: - Full disassembly of the machine - Overhaul of all components - New clutch-brake assembly - Regeneration of slider guides - Reconditioning of the eccentric cam pan - Reconditioning of the main motor - Regeneration of balance cylinders - Replacement of eccentric shaft bearings - Replacement of drive shaft bearings - New progressive lubrication system - Regeneration of the pneumatic system Folrajrwxkaenbrjpg - Cleaning, painting

Condition: reconditioned (used), Year of construction: 1980, Functionality: fully functional, Technical data: Force 350 ton Slide stroke (fixed) 400 mm Speed 10-25 spm Table dimensions 2700 x 1350 mm Distance table-slide 910 mm Adjustable slide 150 mm Weight ca 60 tons Voltage 400 V Working pressure 6 bar Fslranjtq Hhzjbrspg Press proffesionally overhauled by OMERA exclusive dealer: • New clutch-brake unit • New bearings in kinematic system • Replaced with new worn elements of the kinematic system (shafts, pinions, gears) • Regenerated balancing cylinders • New pneumatic system • New automatic lubrification system - progresive • New main engine bearings • New electrical cabinet equipment with wiring composed as follows: - Programable PILZ PSS4000 device - PILZ safe encoder - Fatek FBs60MCJ2 PLC - Weintek 15” touch panel - No. 10 electronic cams - No. 10 tool protection signals - Software backup with entry keys • Machine painted as a new • Instruction manual • Warranty 6 months • Machine localization: 97-410 ŻŁOBNICA, POLAND