Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Year of manufacture 2018 Control: Fanuc TCM Further data to follow... Bwjdsy I Dq Aopfx Akxel

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm Bwsdpfoy I A U Hox Akxsl travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm control Siemens 840D radial face slide travel 320 mm turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva Bsdpfx Akoy I A Utjxewl weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m

Condition: used, turning diameter 256 mm turning length 483 mm greates pass round over bed 548 mm swing diameter over slide rest 320 mm length between centers 584 mm x-axis 203 mm z-axis 508 mm spindle tunring speed 4.800 U/min number of tool places 10 Pos. The machine has a "DONGLE READ FAILURE" error (see photo) and is therefore being sold as defective! Bwedpfxsy I Dg Dj Akxsl Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Bsdpfjy Izauex Akxswl Request a quote!

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. RÖHM chuck incl. quick-change toolholder 'Set', Multifix system For further information, see the data sheet ELMAG Warranty: 3 years (with online registration after purchase) Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED DEALER AND CAN OFFER YOU THE ENTIRE ELMAG PRODUCT RANGE! Bodpfx Aoy Iy H Hjkxjwl REQUEST A QUOTE!

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Control: conventional Centre distance: 1000 mm Bwodpfsy Iyzqsx Akxsl Swing diameter over bed: 520 mm Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm All information provided without guarantee. A power-on demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 3,500 rpm, travel distance X-axis: 580 mm, travel distance Z-axis: 450 mm, spindle motor power: 18,500 W, overall weight: 7,200 kg, number of axes: 2, Horizontal turning machine manufactured in 2006. This Johnford SL60 features a swing over bed of 580 mm and a spindle bore of 76.5 mm. It is equipped with a 12-station tool turret and a high-torque spindle motor capable of speeds up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Johnford SL60 machine we have for sale. Contact us for further details. • Spindle bore: 76.5 mm • Guideways: massive box-ways (for vibration damping) • Tool turret: 12-station • Tailstock: none (removed/not mounted) • Operating hours (power-on): 30,713 h • Total parts produced: 234,092 Additional equipment • Schunk Rota 315 / 86 three-jaw power chuck • Chip conveyor • Tool holder package • Full documentation (Johnford & Fanuc) Bwjdpfx Akey Naiqsxjl • Parameter backup Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) Bwodpsy I Uu Esfx Akxsl • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 313154, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, controller model: ELTROPILOT, input voltage: 400 V, input frequency: 50 Hz, input current: 64 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, Equipment: documentation/manual, GILDEMEISTER CTX 400 E CNC Lathe - Swing diameter over bedway cover: 570 mm - Swing diameter over cross-slide cover: 420 mm - Cross travel (X-axis): 220 mm - Longitudinal travel (Z-axis): 635 mm - Main spindle headstock diameter: 170 mm - Spindle diameter in front bearing: 120 mm - Chuck diameter: 200/250 mm - C-axis speed: 100 rpm - Holding torque: 200 Nm - Indexing accuracy: 0.04° - Including 12-station tool turret, with 6 driven positions - Tailstock diameter (front): 80 mm - Tailstock travel: 515 mm - Tailstock taper: MT 4 Bsdpsy I Tcuofx Akxowl The machine is equipped with a tailstock, tool holders in the tool turret, and a three-jaw chuck, diameter: 200 mm. Attention: The item must be collected bindingly between 24.08. and 27.08.2026 by prior arrangement. FCA D-61352 Bad Homburg – loaded onto truck

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm Bsdpfex Aq E Hex Akxswl tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: excellent (used), Year of construction: 1991, Technical Specifications HBX 360 Distance between centers (mm): 750 Center height (mm): 180 Maximum turning diameter over bed (mm): 360 Maximum turning diameter over cross slide (mm): 180 Spindle bore (mm): 37 Maximum cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound slide travel (mm): 110 Compound slide width (mm): 110 Type of quick-change toolpost Spindle taper type Tailstock Morse taper: MT5 Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Cross feed range (m/min): 0.0125 to 5.6 Rapid longitudinal feed range (m/min): 56 to 112 Thread cutting: Yes Metric threading (number) (mm); Whitworth thread range (tpi) Brake motor Electrical supply: 380V three phase Overall dimensions (mm): 2000 x 1000 x 1250 Weight (kg): [not specified] Chuck: Manual/Hydraulic 3-jaw Equipment: - 2-axis Heidenhain digital readout - Work light - 3-jaw manual chuck - Quick-change toolpost Bwjdpfey H Dxwsx Akxol - Foot brake

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Bwedpfx Aksx D Ezfexol Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,000 h, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, overall weight: 2,200 kg, total width: 1,185 mm, total height: 1,820 mm, product length (max.): 2,120 mm, number of axes: 7, This 7-axis Citizen Cincom A320-VII mod. A20-3F7 was manufactured in 2019. It features a maximum workable diameter of 20 mm, with an option for 25 mm, and a maximum workable length of 200 mm. The machine is equipped with a Fanuc 32i CNC control and includes a bar feeder, high-pressure coolant system, and a chiller. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom A320-VII machine we have for sale. Contact us for further details. • Working hours: 11,000 h Bodpfx Aey Iydfjkxewl • Max workable diameter: 20 mm (25 mm option included) • Max workable length per feeding: 200 mm (188 mm with 25 mm option) • Sub-spindle motor power: 1.5 / 1.1 kW • Sub-spindle speed: max 8,000 rpm • Number of tools on main plate: 17 (5 turning, 4 radial driven, 4 front, 4 rear) • Driven tools speed: max 6,000 rpm (rated 4,500 rpm) • Required power supply: 3 phases, 200 V, 50/60 Hz, 7.1 kVA Additional equipment • LNS EXPRESS 320 S2 barfeeder (200–480 V, 3 phase, 50/60 Hz) • Extension to 25 mm diameter bar capacity • High-pressure coolant system • Rear part unloader • 1x radial driven tool • EFFEGI chiller / hydraulic unit • Spindle cooling radiator + pump • 165 L coolant tank Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2005, TAKISAWA TC 350M CNC TURNING CENTRE Bodpey Eyb Eofx Akxowl MAKE TAKISAWA, MADE IN JAPAN MODEL TC – 350M L5 CONTROL FANUC 21-iTB YEAR 2005 TURRET 12 STATION MAXIMUM SWING 700.0 mm MAX TURNING DIAMETER 460.0 mm MAX TURNING LENGTH 510.0 mm TRAVEL X-AXIS 440.0 mm Z-AXIS 550.0 mm SPINDLE SPEED RANGE 2,500 RPM BAR CAPACITY 80.0 mm TBC PLUS C – AXIS MILLING TAILSTOCK TOOL SETTING PROBE SWARF CONVEYOR 10” 3 JAW CHUCK TURRET TOOLING

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 190 mm, travel distance Z-axis: 350 mm, overall weight: 2,100 kg, number of axes: 6, This 6-axis Index ABC 63 was manufactured in 1999. It has a rated power of 13 kW and a machine weight of approximately 2100 kg. If you are looking to get high-quality turning capabilities, consider the Index ABC 63 horizontal turning machine we have for sale. Contact us for further details. Bwedpfx Asy Iwrmekxol • Mains voltage: 400 V • Control voltage: 24 V • Frequency: 50 Hz • Rated power: 13 kWThe Axis travels are approximetaly Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, functionality: fully functional, KRAFT FB-15/20/25/30 Facing Lathe – Factory New · 1,500–3,000 mm Face Plate · CNC or Conventional BRAND NEW KRAFT FB SERIES FACING LATHE — FOR LARGE FACEPLATE WORKPIECES UP TO 2 TONS (OVERHUNG) The KRAFT FB Series is designed for cost-effective machining of large, flat components such as brake discs, flanges, wheels, bearing rings, or drum parts. Four models cover swing diameters from 1,500 to 3,000 mm and permit overhung workpiece weights up to 2 tons, ideal for single-part and medium batch production. Available as conventional or CNC models (Siemens, Fanuc, or Fagor), with or without tailstock, and with longitudinal or cross beds. KEY FEATURES Heavy-Duty Construction - Machine bed cast in one piece from MEHANITE, bed width 450 mm, heavily ribbed - Hardened and stress-relieved bed slideways - Ensures durable, highly precise machining without deformation High-Precision Main Spindle — G1 Accuracy Class - Induction hardened, spindle bore up to 230 mm (option) - Compact spindle housing, widely ribbed for stability Powerful Drive - Spindle motor 22 kW (29 kW option), up to 600 rpm, high torque - Infinitely variable spindle speed as standard CNC-Ready Ex Works - X/Z servomotors by Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Overhung Workpiece Machining — The Facing Lathe Advantage - Workpieces are clamped directly on the spindle head, no tailstock required - Optimized for flat, disc-shaped components with large diameters OPTIONS CNC Siemens/Fanuc/Fagor · Constant cutting speed · PARAT toolholder · C-axis & driven tools/milling unit · Tailstock · Spindle bore Ø 230 mm · 29 kW spindle motor MACHINE DATA — FOUR MODELS KRAFT FB-15 - Swing diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, Dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Swing diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z travel: 1,000 mm - Servomotors X/Z: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, Dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Swing diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, Dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Swing diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z travel: 1,500 mm - Servomotors X/Z: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, Dimensions: 3000 × 3200 × 3350 mm COMMON SPECS FOR ALL SIZES Turning length: 330 mm · Max. workpiece length: 450 mm · Bed width: 450 mm · Overhung workpiece weight: max. 3,000 kg · Cross slide width: 250 mm · X travel: 330 mm · Spindle bore: 155 mm (230 mm opt.) · Spindle nose: A2-11 (A2-15 opt.) · Spindle taper: MT7 · 4 spindle speed ranges · Spindle motor: 22 kW (29 kW opt.) · Rapid traverse (X/Z): 6/8 m/min · 4-position tool turret, tool shank 32 × 32 mm CUSTOMIZED TO YOUR REQUIREMENTS Tell us your specific application — workpiece range, required accuracy, preferred CNC system — and we will configure the FB Series to your needs. Bjdpfx Asc Txdhokxowl Attractive leasing and hire-purchase conditions through our partners. Delivery including installation, commissioning, and operator training available on request.

Condition: used, Year of construction: 1959, total length: 3,500 mm, total width: 1,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.000 kg - Year: 1959 - Documentation available: No - CE certificate present: No - Serial number: 37 Bjdpfxjy Idtwj Akxswl - Drive system: Conventional - Centre height [mm]: 270 - Swing over bed [mm]: 540 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 1500 - Bed width [mm]: 450 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 14 - Max. spindle speed [rpm]: 710 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3500mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, Bwjdpfey Ex T Tjx Akxol 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW Bsdpjxndbfefx Akxswl voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinevideo - ?v=B9svaSOEWiY Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Bodey Ivyiepfx Akxowl Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Chip conveyor without bar feeder

Condition: used, Year of construction: 2015, operating hours: 24,952 h, CMZ TA 20 Y-400 Swing over bed / carriage: 760 / 600 mm Maximum turning diameter: 460 mm Distance spindle – wheelset: 473 mm Travel X / Y / Z / B: 310 / +70 / -50 / 640 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bwsdpfxeymc U Ao Akxjl Bearing outer / inner: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Tailstock: Quill stroke: 400 mm Tool turret: 12 stations, all powered Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm CNC Control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (approx. L x W x H): approx. 2.5 x 1.8 x 2.1 m Weight: approx. 6 t Operating hours: approx. 24,952 hours Scope of supply: Bar feeder IEMCA KID 80/16, year 2018 Coolant unit

Condition: used, Year of construction: 2019, operating hours: 14,129 h, CMZ TA 20 YS-640 Bwedpoymc Sbsfx Akxjl Swing over bed / carriage: 760 / 600 mm Maximum turning diameter: 460 mm Distance from main to sub spindle: 649 mm Axis travels X / Y / Z / B: 310 / +70 / −50 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing outer / inner: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Tool turret: 12 stations, all live Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Sub spindle: Maximum speed: 4,500 rpm Power: 14 / 8 kW at 292 / 153 Nm Bearing outer / inner: 150 / 100 mm Spindle bore: 61 mm Bar capacity: 52 mm Chuck diameter: 175 mm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (approx. L x W x H): 2.5 x 1.8 x 2.1 m Weight: approx. 6.3 t Operating hours: approx. 14,129 h Scope of delivery: Bar feeder BREUNING IRCO SiMag 80.1-R-3000 II, year of manufacture 2015 Coolant unit

Condition: used, Year of construction: 2015, operating hours: 21,934 h, CMZ TC 35 Y-800 Swing over bed / carriage: 920 / 745 mm Maximum turning diameter: 550 mm Distance spindle – tailstock: 866 mm Bwjdoymc Trspfx Akxjl Travel X / Y / Z / B: 310 / +80 / −60 / 800 / 803 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 3,000 rpm Power: 45 / 39 kW at 1,500 / 1,273 Nm Bearing outer / inner: 240 / 160 mm Spindle bore: 106 mm Bar capacity: 95 mm Chuck diameter: 315 mm Tailstock: Quill diameter / stroke: 110 / 150 mm Travel: 800 mm Tool turret: 12 positions, all with driven tools Maximum speed: 4,000 rpm Power: 16 kW Maximum torque: 75 Nm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 65 kVA Dimensions: approx. L x W x H 3 x 2 x 2.2 m Weight: approx. 8.3 t Operating hours: approx. 21,934 hrs Scope of supply: Bar feeder BREUNING IRCO ILS-MUK 10016-II, year 2015 Coolant unit

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 71 mm, turning diameter: 710 mm, turning diameter over bed slide: 710 mm, turning diameter over top slide: 420 mm, turning length: 3,000 mm, Model: SN 71 B Serial No: 071300780049 Swing Over Bed: 710mm Swing Over Top Slide: 420mm Swing In Gap: 960 x 300mm Spindle Speeds: 10-1000 RPM Spindle Bore: 71mm Motor: 7.5 KW Machine With: Bwjdpfx Akoy Duc Isxol 625mm 4 Jaw Chuck Fixed Steady Quick Change Toolpost Dimensions: 5000 x 1500 x 1750mm Weight: 3250 Kgs