Condition: ready for operation (used), total length: 5,130 mm, total height: 1,130 mm, load capacity: 350,000 kg, net weight: 20,000 kg, total depth: 800 mm, Including yellow filler block which allow you to modify the distance between ram and table Celq Eov Sfppog D Segt Max ram adjustment: 300 mm

Condition: good (used), Year of construction: 1972, Functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Cgjlq Eswcxccjg D Sjt Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Cgslq Ejv Tp D Tsg D Sjt Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, compressed air connection: 5 bar, motor voltage: 200 V, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms Cgolq Eg Deu Haqhs Sst voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: excellent (used), Punching Unit Cslowcgnteq Eg D Ssgt Manufacturer: GEMA * Type 28 x 160 * Projection: 160 mm * Approx. 90 units available ----- Punching Unit Manufacturer: GEMA * Type 48 x 160 * Projection: 160 mm * Approx. 10 units available ----- Punching Unit Manufacturer: GEMA * Type 65 x 160 * Projection: 160 mm * Approx. 3 units available * Cabinet with many accessories!!!

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Cgslqov Tp D Hj Eg D Sst Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, motor voltage: 200 V, punching force: 160 t, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Cgjlq Egeu D Ad Es D Sot Distance above table: (adjustable) 235-335mm Table size: 2030x600mm Bear size: 1500x600mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with sheet feeder and straightener.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, pressing force: 10 t, table width: 430 mm, table length: 440 mm, operating speed: 260 mm/s, overall weight: 800 kg, ram stroke: 200 mm, type of input current: three-phase, oil tank capacity: 46 l, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition. Manufacturer JAM Cslq Egjvbfkrj D Ssgt HYP-1000 model Model year 1995 Capacity 98KN (10t) Stroke length 200 mm Open height: 395 mm Table size 440 × 430 mm Punch hole φ32 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 19 mm/s Ram return speed: 219mm/s With light safety device Two-handed operation. Voltage 3 phase 200v 1.5kw Press body weight: 800kg Operating oil: 43 liters Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, table height: 680 mm, table length: 1,080 mm, overall weight: 10,890 kg, pressing force: 110 t, motor voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA C1-11 110 ton eccentric press with air clutch for sale in mint condition Manufacturer: AIDA Engineering LTD type: C1-11 (2) Year of manufacture: 1988 pressing force 110t two-handed operation central fattening required air pressure: 5 bar stroke length: 180mm number of strokes: 35-65/min table-bear distance: 350mm stroke adjustability: 90mm table size: 1080x680mm bear size: 600x525mm total response time: 170ms voltage: 200v 50Hz 7.5kw Cgslqju Hatcj Eg D Sot machine weight: 10884 kg

Condition: like new (used), Functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Cjlq Ejvbdyfog D Sogt Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, height adjustment type: electric, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Cjlq Eg Dju D Dhxj Sogt Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, ram stroke: 150 mm, motor voltage: 220 V, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Cgjlq Eg Dou Hav Rs Set Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 220v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 1989, overall weight: 10,884 kg, pressing force: 110 t, motor voltage: 200 V, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AIDA Type: NC1-110(1) Pressure: 110t Year of manufacture: 1989 Stroke length: 70mm Distance above table: (adjustable) 230-320mm Colq Eg Dju D D Sdj Sogt Table size: 1070x520mm Bear size: 630x520mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 10884kg Inclusion dimensions: 1270x1960x2995mm Automatic greasing system. Optionally with sheet feeder and straightener.

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, table width: 600 mm, table length: 1,150 mm, overall weight: 9,600 kg, pressing force: 110 t, motor voltage: 220 V, input voltage: 220 V, Equipment: documentation/manual, safety light barrier, APA 110 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 110 year of manufacture: 2018 pressing force 110t two-handed operation central fattening PAC10 control safety light barrier Celsu Hav Deq Eg D Sogt required air pressure: 6 bar stroke length: 150mm number of strokes: 30-90/min table-bear distance: 360/410mm stroke adjustability: 80mm table size: 1150x600mm bear size: 650x470mm total response time: 170ms voltage: 220v 50Hz 11kw machine weight: 9600 kg

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, throat depth: 180 mm, pressing force: 5 t, table width: 450 mm, table length: 320 mm, operating speed: 300 mm/s, overall weight: 270 kg, type of input current: three-phase, oil tank capacity: 9 l, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Cslq Eg Devbdpyj Sogt Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, throat depth: 100 mm, pressing force: 2 t, table width: 330 mm, table length: 350 mm, cylinder diameter: 28 mm, air pressure: 6 bar, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 Cgjlq Eovbfbwjg D Sst manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, ram adjustment: 75 mm, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, motor voltage: 220 V, input voltage: 220 V, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control Celq Egsu Hauto D Sogt required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 220v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, motor voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Cjlq Egju Dw U Se D Sogt Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, ram stroke: 100 mm, motor voltage: 200 V, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm Celq Egju E U Nio D Sjgt number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, table width: 2,700 mm, table length: 760 mm, overall weight: 27,000 kg, pressing force: 200 t, table height above floor: 390 mm, punching force: 200 t, Equipment: safety light barrier, Manufacturer: AIDA Type: NC2-200 Pressure: 200t Year of manufacture: approx. 1991 Stroke length: 150mm Distance above table: (adjustable) 280-390mm Table size: 2700x760mm Bear size: 2100x700mm Colqou Dk Sks Eg D Sogt Electric power: 3x200V(!!), 22kW - Japanese standard Net weight: 27000kg Size: 2475x2570x3625mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, table width: 680 mm, table length: 1,070 mm, stroke adjustment: 90 mm, overall weight: 9,600 kg, pressing force: 110 t, ram stroke: 180 mm, Equipment: documentation/manual, AIDA NC1-11 110 ton eccentric press with air clutch for sale in mint condition Manufacturer: AIDA Engineering type: NC1-11 (2)-b Year of manufacture: 1988 pressing force 110t two-handed operation central fattening required air pressure: 5 bar stroke length: 180mm number of strokes: 35-65/min table-bear distance: 450mm stroke adjustability: 70mm table size: 1060x680mm Cgelq Egju Har Eo D Sjt bear size: 630x520mm total response time: 170ms voltage: 200v 50Hz 7.5kw machine weight: 10884 kg

Condition: used, Eccentric press, 20 ton eccentric press, for sale in excellent condition Year of manufacture: 1978 Cjlq Egouf Ayto D Sogt Pressure: 20 tons Table size: 500x300 mm Stroke length: 170+30 mm 7.5kW, 15A, 400V, 50Hz The brake casting is broken (in the photos), so it works continuously. It can be repaired!!

Condition: excellent (used), Year of construction: 1991, pressing force: 250 t, motor voltage: 200 V, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Celq Eou Dxb Teg D Segt Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: good (used), Manufacture: Digép Type: SD63 Push force: 63t Table: 560 x 740 mm Stroke length: 200 mm Cgoloiukrrsq Eg D Sjt Net weight: 4t

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Equipment: safety light barrier, Manufacturer: AIDA Type: NC1-60(1) Pressure: 60t Year of manufacture: approx. 1991 Cgolqou D Ak Se Eg D Sot Stroke length: 90mm Distance above table: (adjustable) 200-270mm Table size: 870x400mm Bear size: 480x410mm Electrical power: 3x200V(!!), 7.5kW - Japanese standard Net weight: 6350 kg Size: 1150x1700x2695mm Automatic greasing system. Optionally with disc winder and straightener.