Condition: good (used), Year of construction: 1993, Functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN throat depth 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Weight approx. 2.5 tons Cob Eov Rlt Eocv Ubsgt Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m . Equipment and scope of delivery : . Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: used, Functionality: fully functional, machine/vehicle number: 71737, total width: 640 mm, total length: 1,575 mm, total height: 1,970 mm, overall weight: 645 kg, input voltage: 3,000 V, pressing force: 40 t, pressing speed: 5 mm/s, The hydraulic two-column assembly and pressing press with a force of 40t OKS 1671M is designed for straightening parts, pressing in and out of sleeves, bushings, bearings, gears, as well as other pressing works during the repair of tractors, cars and agricultural machinery. The press can be used for cutting, bending, drawing and other operations. Maximum force, kN (tf) – 392(40) Maximum working pressure in the hydraulic system, MPa (kgf/cm2) – 20(200) Cob Ecewbz Irev Ubjgt Piston stroke, mm – 250 Piston speed during the working stroke, mm/s – 5 Maximum distance between the table and the piston, mm – 1000 Maximum table travel, mm – 750 Dimensions of clearances between the posts, mm: from front to back – 250 from left to right – 1000 Dimensions of the table support plates, mm – 400х450 Working fluid – industrial oil I20A GOST 20799-75 Pump type – eccentric three-plunger Feed, l/min – 5 Nominal speed, rpm – 1500 Power consumption, kW – 3 Overall dimensions, mm – 1575х640х1970 Weight, kg – 645

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, ram adjustment: 70 mm, overall weight: 5,200 kg, pressing force: 75 t, height adjustment type: mechanical, power: 7.55 kW (10.27 HP), Equipment: documentation/manual, Sangiacomo T75 CE Cgeb Ecv Usv Haafebet Worked in manual mode. Safety doors are included (new-packed)

Condition: used, Year of construction: 1971, Hydraulic Müller Press Press force 5,000 kN Table size 2,750 x 1,500 mm Ram area 2,750 x 1,500 mm Installation height 1,670 mm Cjb Ecsv Nwc Nev Ubjgt Stroke 1,070 mm Ram cushion force 46 MP Ram cushion stroke 150 mm Die cushion force 140 MP Die cushion stroke 300 mm

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Csb Eov Rwu Uscv Ubegt Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: new, Technical data: Pressing pressure max.: 5000 kg Projection: 315 mm Installation height: 800 mm Stroke: 530 mm Height: 1650 mm Punch thickness: 56 mm Table surface: 250 x 360 mm Recess in the table: 85 x 125 mm Turntable with 4 slots: ø 237 mm Cgsb Ejuxpwnecv Ubot Weight, approx.: 145 kg

Condition: used, Table size: 630 x 490 mm Stroke length: 500 mm Max. thrust: 500 mm Cgob Ecv Usv S Uyqsbot

Condition: refurbished (used), Year of construction: 1980, Functionality: fully functional, Harris TGS57 - fully refurbished. Baler complete with drive, hydraulic pumps, valves, motors and complete piping. Cgob Eevmf Nrecv Ubet Electric control consisting of the main control panel, control desk. Circulating pump, filter and cooling system.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, ram adjustment: 100 mm, total height: 3,000 mm, table width: 660 mm, table length: 1,020 mm, total width: 1,500 mm, total length: 1,500 mm, overall weight: 8,000 kg, pressing force: 120 t, Eccentric press ROSS with special device Presskraft Stroke adjustment 10-140 mm Sslide adjustment 100 mm Csb Ecewcnraev Ubjgt Strokes per minute 17-84 Presskraft device is measuring pressure force. Video is available.

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm stroke 400 mm Cgob Ecv Uowbizyjbot feed down 100 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Year of construction: 2020, Condition: as good as new (ex-display), Hydraulic press for tests and retouching of dies Brand: MHG Model: ER.2S.DM-300/2100 Serial number: 927 Year: 2020 Required power: 40kw Hydraulic oil: 1000Ltrs. deposit + 200 liters. circuit filling Total number of cycles: 403 (NEW MACHINE, PRACTICALLY UNUSED) Cob Ecv Usk Sgvyobogt Maximum force: 300t Number of cylinders: 3 Maximum tooling dimensions: 1400x1400mm Maximum tooling mass: 16,000kg Maximum working table and mobile table opening: 1690mm Minimum opening of work table and mobile table: 960mm Maximum mobile table travel: 730mm Approach speed: 92 mm/s Recoil speed: 93mm/s Stop time: 0.2s Safety distance: 500mm Weight with empty tank: 35.000kg

Condition: like new (used), Year of construction: 2024, pressing force: 300 t, Hydraulic 300 T double-column press, 850 x 650 mm Tonnage: 300 T Clearance between columns: 950 mm Cylinder stroke: 450 mm Max. distance between table and ram: 600 mm Table height from floor: 1,000 mm Total height: approx. 3,300 mm Cgjb Eewarzyecv Ubst Width: approx. 2,020 mm Depth: approx. 1,250 mm Weight: approx. 7,000 kg Double-speed hydraulic power unit Power: 11 kW Approach speed: 13 mm/sec Working speed: 2.8 mm/sec Return speed: 19 mm/sec Two-hand operation Ram return by pressing the blue button Travel limitation by adjustable sensors Lower fixed table with T-slots, 850 x 650 mm 650 mm Tamper with T-slots, as X, size 750 x 600 mm CE certificate and user manual: Included

Condition: used, Manufactured by: Exner Type: EX 100 SB Table size: 780 x 700 mm Maximum press force: 100 t Cgjb Ecev S Uxgsv Ubst

Condition: excellent (used), Year of construction: 2008, operating hours: 26,793 h, Functionality: fully functional, Bruderer BSTA 250-75B with BBV 190/85H -B-Control -Tool area 750mm -Adjustable stroke -complete documentation - Soundproof cabin Cgob Ecvjtwlyis Ubet - Machine checked, in very good condition! contact us!

Condition: good (used), Year of construction: 1987, ram adjustment: 100 mm, total height: 26,850 mm, table width: 1,000 mm, table length: 720 mm, installation height: 450 mm, stroke adjustment: 120 mm, total width: 12,700 mm, total length: 23,100 mm, overall weight: 10,500 kg, pressing force: 160 t, power: 11 kW (14.96 HP), Eccentric press LE 160 C. Year prod. 1987(ZTS - SLOVAKIA). Parameters: Max. pressure 160ton. Stroke 20-120mm. Number of jumps in single movement 30/min. Number of jumps in continuous movement 50/min. Adjustment of the slider 100mm. Maximum distance of the slider from the table 450mm. Overhang 340mm. Slide attachment surface 750 x 380mm. Clamping area of the table 1000 x 720mm. Cgsb Ecv Uotzwqgobot Mounting hole in the slider fi 50mm. Working pressure of air 0,4 - 0,6 MPa. Motor power 11kW. Overall dimensions (Height x Length x Width) 2685 x 2310 x 1270mm. Weight 10500kg. Technical condition of the machine good. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Cgsb Ecsuifr Hov Ubot Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Condition: excellent (used), Year of construction: 2008, operating hours: 24,873 h, Functionality: fully functional, Bruderer BSTA 500-110B with BBV 202/120 -B-Control -Tool area 1100mm -Adjustable stroke -complete documentation - Soundproof cabin Cgob Estwltvscv Ubjt - Double pallet decoiler ( Huras ) - Machine checked, in very good condition! contact us!

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, ram stroke: 400 mm, clearance between the columns: 630 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 10 tons. Working pressure 16 MPa. Upper table 360 x 280 mm. Lower table 500 x 400 mm. Clearance 630 mm. Cylinder stroke 400 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Power requirement 5.2 kW. Cgob Ecjwb Dhnev Ubot Weight 1300 kg. Height 2350 mm, Length 1300 mm, Width 1000 mm. The technical condition of the machine is very good. The machine has been overhauled.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 4341, overall weight: 285 kg, Riveting press Brand: Agme Model: RR-14 Manufacturing series: 7004322 Manufacturing No.: 4341 Year of manufacture: 2010 Characteristics: Max. diameter 40 kg/mm2: 14mm. Adjustable riveting stroke: 5-50mm. Air pressure: 6 bar. Adjustable riveting time: 0-5 sec. Power circuit: 220/380V. 50/60Hz. Installed power: 1,2Kw Control circuit: 24V DC. Two-hand safety control: Included. Cebjrfwy Is Ecv Ubsgt Dialogue control 4 languages: Included Parts counter: Included Weight: 285 Kg

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, total height: 3,700 mm, total width: 1,250 mm, total length: 2,200 mm, throat depth: 800 mm, pressing force: 250 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 8,000 kg, reverse speed: 110 mm/s, ram plate width: 750 mm, ram plate length: 450 mm, ram stroke: 500 mm, oil tank capacity: 500 l, PYE 250 S1M hydraulic press with ejector. Prod. by WMW VEB Zeulenroda (Germany). 1988. Parameters: Maximum pressing force 250 tons. Working pressure 20 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Cob Ecvovcb Tlj Ubjgt Upward speed 110 mm/sec. Ejector force 100 tons. Ejector stroke 200 mm. Power requirement 20.5 kW. Weight 8000kg. Height 3680mm, length 2200mm, width 1250mm. Technical condition of the machine very good. Machine after general overhaul.

Condition: good (used), Year of construction: 1991, operating speed: 8 mm/s, column diameter: 200 mm, retraction force: 30 t, reverse speed: 40 mm/s, Brand: LoireSafe Year: 1991 Type: Hydraulic Maximum Force: 15-150Tn Return force: 30Tn Movable platen stroke: 1200mm Table dimensions: 2800x1500mm Moving platen dimensions: 2800x1500mm Table displacement stroke: 1500mm Guided height: 800mm Diameter of columns: 200 mm Cgjbeudv D Ne Ecv Ubjt Height of the table to the floor: 700 mm Power: 11Kw Approach speed: 50 mm/sec. Working speed: 8 to 2mm/sec. Return speed: 40 mm/sec

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, power: 8.75 kW (11.90 HP), PYE 25 S1M hydraulic press with ejector. Year of manufacture 1990. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cgsb Ecotzwxdsv Ubot Cylinder stroke 500 mm. Down speed 100 mm/sec. Upward speed 450 mm/sec. Ejector force 10 tons. Ejector stroke 160 mm. Power requirement 8,75 kW. Weight 2200kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Year: 2002 Weight: 9.500 Kg Rated force: 100Tn Type: Pneumatic clutch eccentric Cgsbjuif Tko Ecv Ubjt Stop position: 580mm Closing height: 450mm Maximum flywheel RPM: 500mm Travel: 13-130mm Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Safety distance: 486 mm

Condition: excellent (used), Year of construction: 1977, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Csb Ecvetzxvws Ubjgt Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Plate thickness: 10mm Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Max. spindle/pusher travel: 130mm Cjbeudwr Us Ecv Ubsgt Strokes per minute: 53