Condition: used, Year of construction: 1970, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 700 x 525 mm ram surface 400 x 315 mm ram adjustment 80 mm no. of strokes 52 / 78 Hub/min Cgsb Eruhsugnppekjt tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,10 x 1,05 x 2,87 m

Year of construction: 2023, Condition: new, Pressing force 150to Siemens PLC hydraulics Bosch/Rexroth stroke 400mm Cgsb Erskyu Hvsuhkst table area 600mm x 800mm

Condition: excellent (used), Year of construction: 1990, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, ram stroke: 500 mm, type of input current: three-phase, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), PYE 160 S/1M hydraulic press. Year of production 1990, manufacturer VEB Wema Zeulenroda (Germany). Machine after a general overhaul. Parameters: Maximum pressing force 160 tons. Working pressure 16 MPa. Upper table 700 x 450 mm. Lower table 900 x 630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 125 mm/sec. Power requirement 17 kW. Oil quantity in the tank 500 l. Weight 7000kg. Height 3450mm, length 2200mm, width 1250mm. Machine in very good condition. Cgeb Ejqy E I Roruhket It is possible to make a visual inspection and check the machine in motion.

Condition: ready for operation (used), Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible. Ceb Ejwaa E Hsruhkjgt

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Cgjb Eev U Nm Deruhkjt Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Cgob Eruhjv T T Sbjket Weight 6 tons Price: €6,000 plus VAT, ex location

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m Csb Eotqqq Rjruhksgt - with die cushion - with light bareer make SICK

Condition: used, Year of construction: 1981, total height: 3,600 mm, pressing force: 160 t, table width: 600 mm, table length: 1,250 mm, overall weight: 7,500 kg, ram stroke: 500 mm, distance table to ram: 800 mm, power: 20.5 kW (27.87 HP), lifting height: 500 mm, worktable length: 1,250 mm, space requirement length: 1,250 mm, space requirement width: 2,150 mm, year of last overhaul: 2006, CONTROLS .. PLC PRESS DESIGN .. drive system: hydraulic .. frame design: C-frame, single sided .. table cushion: yes PRESS FORCES .. total force (nominal): 160 to Cob Erueurcl Dohkegt PRESS TABLE .. table surface (left-right): 1250 mm .. table surface (front-back): 600 mm .. thickness of bolster plate: 100 mm SLIDE .. table surface (left-right): 750 mm .. table surface (front-back): 450 mm .. stroke: 500 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 200 mm/s .. return velocity max.: 250 mm/s TOOL ASSEMBLY DIMENSIONS .. distance table - slide max.: 800 mm .. throat (C-frame): 360 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 20.5 kW .. mains voltage: 380 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 1250 mm .. space requirements -front/back-: 2150 mm .. total height: 3600 mm .. total weight approx.: 7500 kg control system upgraded to SIEMENS/PILZ

Condition: excellent (used), Technical data: Number of pistons: 6 Piston diameter: 65 mm Connection to CO. Shelf dimensions: 1300x3000 mm Clearance: 400 mm Hydraulic pressure Safety switch Motor power: 3 kW Power supply: 380 V Cgsb Eswbdfaeruhkst Overall dimensions: Length: 3530 mm Width: 1470 mm Height: 2020 mm

Year of construction: 2015, Condition: ready for operation (used), Workpiece Ceb Erev Nb Rdeuhkogt Workpiece drm over bed 1800 mm Workpiece drm over support 1400 mm This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information. Application Types Bending

Condition: used, Double column eccentric press, WEINGARTEN punching machine type HD 250 Manufacturer no. 126 127, built in 1974 Ideal for overhaul and rebuilding with new electrics, mechanically in good condition Pressure force 250 tons. Stroke adjustment 10-100 mm Weight approx. 25 tons. Table size 1280 x 1120 mm Distance between the columns 1480 mm Side column clearance 680 mm Stroke adjustment approx. 10-100 mm Ram adjustment 120 mm Installation height with largest stroke at bottom approx. 780 mm Stroke rate 30 to 100 strokes/min. (infinitely variable) Motor power 11.5-42 kW Power supply 380 volts, 50 Hz - very precise ram guide through 8-way flat guide - 2-connecting rod design - hydraulic overload protection - pneumatic clutch-brake combination ORTLINGHAUS Cgob Eruev Hrunjhkst - electro-motor ram adjustment - manual stroke adjustment - infinitely variable stroke rate via adjustable drive motor Elektra Faurndau - adjacent electrical control cabinet (outdated, not functional) - machine for installation above ground Space requirement with platform L x W x H 4000 x 2700 x 5100 mm Space requirement without platform L x W x H 3000 x 1900 x 5100 mm Height of press stand with drive motor approx. 4900 mm Transport dimensions, press stand lying Length: 510 Width: 2000 x Height: 3000 mm Total weight approx. 25 tons. Mechanically in good condition, electrical system outdated and not working From stock 37235 Hessisch Lichtenau

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, pressing force: 450 t, table width: 750 mm, table length: 600 mm, overall weight: 22,000 kg, ram stroke: 250 mm, Equipment: safety light barrier, Dieffenbacher P 04 50 A/S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher P 04 50 A/S press Cgjb Ersv E Nhpeuhket A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm Cjb Eruetqqwuehkegt stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1990, pressing force: 12 t, overall weight: 1,000 kg, ram stroke: 200 mm, lifting height: 200 mm, PRESS DESIGN .. drive system: hydraulic .. frame design: C-frame, single sided PRESS FORCES .. total force (nominal): 12 to SLIDE .. stroke: 200 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 380 V Cebjurclws Eruhkjgt .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 1000 kg Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

Year of construction: 2007, Condition: ready for operation (used), A RUF briquetting press for the metal processing industry is available. Power: 4kW, max. specific pressure: 2800kg/cm², briquette diameter: 60mm. Machine dimensions X/Y/Z: approx. 1800mm/1700mm/2000mm, weight: approx. 1500kg, briquette counter: approx. 5 million, documentation available. On-site inspection is possible. Cgjb Erujv Uqc Hshket

Condition: refurbished (used), Year of construction: 1984, Press force 400 tons Table size 2,500 x 1,500 mm Ram area 2,500 x 1,500 mm Stroke 320 mm Ram adjustment 150 mm Installation height 1,200 mm Strokes/min 25 Ceb Erusv Izwushksgt Machine live. In very good condition, overhauled in 2023

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 7551051722-E, total height: 3,100 mm, overall weight: 16,000 kg, total width: 4,550 mm, working width: 3,050 mm, total length: 2,400 mm, pressing force: 300 t, Machine was not used much Cobov Uyulj Eruhkegt

Condition: excellent (used), Year of construction: 1973, Functionality: fully functional, pressing force: 400 t, table width: 900 mm, table length: 850 mm, overall weight: 23,000 kg, Equipment: safety light barrier, Hans Shoen UTE/B 400 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Hans Shoen UTE/B 400press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Cjb Ejv E Rpnsruhkogt Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min Csb Eruhovb I Iteksgt total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 2003, installation height: 335 mm, overall weight: 11,000 kg, pressing force: 160 t, year of last overhaul: 2016, controller manufacturer: SIEMENS, controller model: S5, lifting height: 60 mm, ram stroke: 60 mm, table length: 560 mm, tool height: 335 mm, CONTROLS .. PLC SIEMENS S5 SLIDE .. total force (nominal): 160 to .. stroke: 60 mm COUNTER RAM .. nominal force: 80 to V-RING .. nominal force: 80 to TOOL DIMENSIONS .. lower table (left-right): 560 mm .. lower table (front-back): 600 mm .. upper table (left-right): 560 mm .. upper table (front-back): 600 mm .. shut height max.: 335 mm .. ram adjustment: 125 mm .. distance between columns (H-frame): 630 mm .. passline opening (free passage in side columns): 270 mm CROP SHEAR .. cutting force: 150 kN DIMENSIONS / WEIGHTS .. total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. decoiler: optional .. waste cutter: yes .. slug separator: optional !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston Cgob Erjurcc Nsuhkot + new ball guides and guide shafts + feeder completely overhauled, motor and cable new + complete shear sealed, new carbide shear blades + Worm shaft new bearings and seals replaced 2018: new Raziol belt spraying system Optional: + double swivel reel AMT AHDR 500/1600-R

Condition: good (used), Year of construction: 1976, Functionality: fully functional, Technical data : Power 40 to 2 lifting speeds 57 + 86 H/min Projection 250 mm . Further data according to offer . Cob Eruhev H R Nwoksgt Delivered with new press test incl. new test report. .

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW Csb Eruhotqqxbokogt weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: used, Year of construction: 1982, pressure 63 t distance between columns 320 mm stroke 8 - 120 mm table-size 800 x 600 mm ram surface 500 x 400 mm throat 315 mm dayligth 410 mm ram adjustment 70 mm no. of strokes 56 / 90 Hub/min total power requirement 6 kW weight of the machine ca. 5,5 t dimensions 2,10 x 1,52 x 2,72 m inclinable Cgjb Eruhjtqqkqokot

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm Cgsb Eougnpijruhket total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Year of construction: 1975, pressure 63 t distance between columns 315 mm stroke 8 - 100 mm Cjb Ejuap Nwsruhksgt table surface area 850 x 600 mm throat 325 mm ram surface 545 x 360 mm ram adjustment 63 mm no. of strokes 57 / 86 Hub/min total power requirement kW weight of the machine ca. t dimensions of machine L x W x H 1,70 x 1,12 x 2,63 m