Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: BV28E.081, clearance between the columns: 1,200 mm, table width: 1,200 mm, table length: 1,000 mm, table load: 7,000 kg, BV 28 E is the advanced version with a hydraulic system controlled by electronic servo proportional valves and a control of parallelism through Heidenhain optical lines. The BV 28 E is equipped with user-friendly graphics control panel, monitored through Siemens PLC commanded by Touch Panel. Platen dimensions are 1.200×1.000 mm (47X39 inches). The max. clamping force is 500kN. The max. load capacity on lower plate is 7.000 kg, while on the upper is 2.500 kg. It has the following options on it: ENERGY ACCUMULATOR (SINGLE SHOT) Automatic special wax injection unit Hydraulic auxiliary cylinder control unit (max. 2+2) Hydraulic ejection unit Cgsb Hewakkmob Hzvot

Condition: good (used), Year of construction: 1981, Functionality: fully functional, ram adjustment: 80 mm, total height: 23,700 mm, table width: 660 mm, table length: 530 mm, stroke adjustment: 95 mm, total width: 12,450 mm, total length: 15,850 mm, overall weight: 4,500 kg, pressing force: 40 t, power: 4 kW (5.44 HP), LEN 40C Eccentric Press. Ceb Hb Hetzwt Uszvjgt Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Warehouse number cod.323 Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Ceb Hb Hzjvm Eifovegt Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Year of construction: 1997, Condition: ready for operation (used), Ross force 63 ton press Ceb Hbov Sc I No Hzvegt

Condition: excellent (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 1522896, overall weight: 2,000 kg, pressing force: 40 t, ram stroke: 60 mm, Any accessories can be discussed on site. Cgjb Hb Hzsv Sirhjvjt

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Csb Hswaiw Sob Hzvsgt Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Year of construction: 1998, Condition: ready for operation (used), A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible. Cjb Hbov Scrno Hzvjgt

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder Csb Hb Hehktq Ajzvegt - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Year of construction: 1993, Condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Cgsb Hjihf R Uob Hzvot Lateral window

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) Csb Hb Hzepfcx Iovjgt (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2011, Technical details: pressure capacity max.: 25 t Cgobem Idygo Hb Hzvot weight: 3000 kg

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year Cgeb Hb Hzovm Eixovet MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: excellent (used), Here we offer you a control unit. Control unit for RIVSET self-pierce riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was for inspection at the manufacturer and is functional. Cgsbjpgul Ee Hb Hzvet Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: as good as new (ex-display), Year of construction: 2006, YEAR : 2006 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER slide : mm. 200. Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600. Cushion capacity STROKE OF THE BLANKHOLDER slide : mm. 400. Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights Cob Hb Hzjvm Ei Sevsgt TOTAL WEIGHT: KG. n.d

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch riveter operating voltage: 400V 50 Hz rated current: 12A Main fuse: 35 A control voltage: 24 V signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 279 kg year of manufacture: 2012 Type: 9524-640-824-5 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) Cgjbepfcx Se Hb Hzvot (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 2000, Thrust: 2000 TON. RATED CAPACIT Cgjbsvm Eire Hb Hzvst Model: S4-2000.5000-2500-LD TYPE Year of construction: 2000 YEAR OF CONSTRUCTION Table size: 5,000 x 2,500 mm TABLE DIMENSIONS Slide adjustment: 400 mm SLIDE ADJUSTMENT Strokes per min.: 10-16 c/min. CONTINUOUS SPEED (variable) Stroke: 800 mm SLIDE STROKE Mold clearance at BDC: 1,200 mm SHUT HEIGHT Hydraulic Safety: present Hydraulic Safety

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V year of manufacture: 2011 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Csb Hbjpgulas Hzvjgt

Condition: like new (used), Year of construction: 2009, Thrust: RATED CAPACIT Model: TYPE Year of construction: YEAR OF CONSTRUCTION Table size: TABLE DIMENSIONS Slide adjustment: SLIDE ADJUSTMENT Strokes per min.: CONTINUOUS SPEED (variable) Stroke: SLIDE STROKE Mold clearance at BDC: SHUT HEIGHT Main motor power: MAIN MOTOR POWER Hydraulic Safety: Hydraulic Safety 1000 TON. PDM/4B 2009 4,900 x 2,380 mm. 500 mm. 8-16 c/min. 900 mm. 1,500 mm 220 kw present Cgeb Hb Hzjvm Eh Uovst

Condition: as good as new (ex-display), Year of construction: 2004, Functionality: fully functional, Thrust: 1000 TON. RATED CAPACIT Model: PDM/4B TYPE Year of construction: 2009 YEAR OF CONSTRUCTION Table size: 4.900 x 2.380 mm. TABLE DIMENSIONS Slide adjustment: 500 mm. SLIDE ADJUSTMENT Strokes per min.: 8-16 c/min. CONTINUOUS SPEED (variable) Stroke: 900 mm. SLIDE STROKE Mold clearance at BDC: 1.500 mm SHUT HEIGHT Csbsvcq Ufj Hb Hzvsgt Main motor power: 220 kw MAIN MOTOR POWER Hydraulic Safety: present Hydraulic Safety

Condition: good (used), Thrust 100 ton. Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Press tables 1,200 x 600 mm Lateral passage 460 m Hits per min. 40,180 Min. 460 mm Transfer DGM Cjb Hoq N Et Njb Hzvegt

Condition: used, Thrust: 600 TON. Barbed points: no. 2 Model: AF 600 MB 30-60 Year of construction: 1994 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Cgob Hjq N Ettob Hzvjt Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.

Condition: good (used), Functionality: fully functional, pressing force: 1,500 t, table width: 2,440 mm, table length: 4,572 mm, die cushion stroke: 360 mm, clearance between the columns: 4,800 mm, stroke distance: 1,320 mm, Equipment: documentation/manual, Manufacturer Muller Model BZE 1500 Year 1980 Excellent condition Cgebeq Hdz Uo Hb Hzvet Stock number cod.0313 Thrust: 1500 ton. Thrust points: no. 6 Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Table size: 4,572 x 2,440 mm. Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy

Condition: good (used), Manufacturer CLEARING Model S4-900-180 Condition Used Stock No.0274 Thrust: 900 ton. Thrust points No. 4 Plunger Slide stroke 940 mm. Slide adjustment 762 mm. Number of strokes/min No. 16 Mold clearance at PMI 1,412 mm. Slide size 4,572 mm. x 2,438 mm. Table size 4,572 mm. x 2,130 mm, Pull-out carriage Present Useful front passage 4,622 mm. Side passage in the shoulder 1,400 mm. Cjb Hb Hetzy R Nszvegt Hydraulic Safety Present Cushion in the Basement Present Bottom plate press stroke 280 mm.

Condition: repair required (used), Year of construction: 2014, Thrust: 500 TON. RATED CAPACIT Model: AR 500/2MB30-30 TYPE Year of construction: 2014 YEAR of CONSTRUCTION Cjb Hb Hzsvm Ekpevegt Table size: 3,000 x 1,500 mm. TABLE DIMENSIONS Slide adjustment: 200 mm. SLIDE ADJUSTMENT Strokes per min.: 5-50 c/min. CONTINUOUS SPEED (variable) Stroke: 300 mm. SLIDE STROKE Mold clearance at TDC: 800 mm SHUT HEIGHT Lateral passage in the window: 1,100 mm Lateral windows Main motor power: 60 kw MAIN MOTOR POWER Hydraulic Safety: present Hydraulic Safety

Condition: good (used), MODEL: VK.1250.46.76 TYPE YEAR OF CONSTRUCTION: N.D. YEAR of CONSTRUCTION DRIVE KINEMATICS : Eccentric DRIVE KINEMATICS CAPACITY. : 1,250 Ton. RATED CAPACITY PUSHER POINTS : N°4 PLUNGERS NUMBER of connecting rods SLIDE STROKE : 762 mm. SLIDE STROKE VERTICAL HEIGHT, from top of bolster carriage, CBRA : 1,530 mm. SHUT HEIGHT, from top of bolster, SDAU SLIDE ADJUSTMENT : 610 mm. SLIDE ADJUSTMENT TABLE DIMENSION : 4,460 x 2,400 mm.(possible 5000x2400) TABLE DIMENSIONS QUANTITY OF MOUNTING TROLLEYS : no. 2 side pullers with towing NUMBER of MOVING BOLSTERS BOLSTER PLANE MOVEMENT : Lateral MOVING BOLSTER EXIT BOLSTER PLANE HEIGHT: 400mm. MOVING BOLSTER HEIGHT CONTINUOUS SPEED (variable) : 8-18/min. CONTINUOUS SPEED (variable) MAIN MOTOR POW : n-d- MAIN MOTOR POW CLEARANCE BETWEEN FRONTAL UPRIGHTS (l-right-left) : 4,400 mm. CLEARANCE BETWEEN UPRIGHTS (L-R) CLEARANCE BETWEEN LATERAL UPRIGS (front-back) : 2,400 mm. CLEARANCE BETWEEN UPRIGHTS (F-B) MAXIMUM HEIGHT from FLOOR WIRE : to be verified mm. MAXIMUM HEIGHT from FLOOR LEVEL Cgebsri T Aqo Hb Hzvjt MAXIMUM PRESS WEIGHT : n.d. ton. MAXIMUM PRESS WEIGHT STATE OF THE PRESS Assembled THE STATE OF THE PRESS