Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included Dkob Hidsr Etuloa Del

Condition: used, pressure:120 t stroke:400 mm table surface area:1750 x 500 mm press capacity:120 t working width:1740 mm total power requirement:3,0 kW weight of the machine ca.:2 t Dkebjt Hmlds Hida Dsl dimensions of the machine ca.:2 x 1,0 x 1,5 m

Condition: new, working width: 1,200 mm, pressing force: 150 t, cylinder stroke: 400 mm, - Capacity 150 tons - Cylinder stroke 400 mm - Working width 1200 mm - Cylinder is movable - Electrically or manually operated - Pressure gauge - Emergency stop - 400V Dksb Hidotq Aukea Dol

Condition: used, Year of construction: 1963, pressure 80 t throat 280 mm stroke 10 - 140 mm no. of strokes 65 Hub/min Dsbovki H Ae Hida Dekl distance table/ram, max. stroke up, adjustment up 270 mm table surface area 840 x 560 mm hole in the table 195 mm ram surface 750 x 250 mm ram adjustment 60 mm total power requirement 4,0 HP weight of the machine ca. 4,2 t dimensions of the machine ca. 1,6 x 1,2 x 2,4 m with motor, back gears, wheel-guard, air-friction clutch, safety device in TDC and secure control according to the German Safety Regulations for manual put-in (UVV), mech. overload protection in slide, autom. centralized lubrication, fixed bed, two-hand operation, control cabinet

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: STHP 80KN, total height: 1,320 mm, total width: 510 mm, total length: 200 mm, pressing force: 8 t, table width: 300 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr Djb Hiot Rhb Isda Dekl with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11 kWweight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Dob Hioktm N Dsda Djkl

Condition: new, overall weight: 3,000 kg, pressing force: 100 t, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm Dkobjucprwe Hida Dsl - Table size 1000 x 1500 mm - Bridge can be moved electrically - Cylinder can be moved to the left and right - Electrically or manually operated - pressure gauge - Emergency stop - Documentation - 400V

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking Dkob Hieupxr Ueda Del

Condition: new, column width: 2000 x 1000retracting speed: 150weight approx.: 35.000stroke: 800total power requirements: 30daylight: 1000rapid traverse: 120pressure: 500: 2500 x 1500working speed: 12messurements (LxWxH): 2500x2700x5400 Djb Hidjd Aca Aoa Dekl

Condition: new, pressing force: 80 t, cylinder stroke: 400 mm, - Capacity 80 tons - Cylinder stroke 400 mm - Working width 900 mm - Cylinder can be moved to the left and right - Electrically or manually operated Dsbsu Dg Ego Hida Djkl - pressure gauge - Emergency stop - 400V

Condition: used, pressure 120 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 5,8 mm/sec Dob Hidogg Nn Ioa Djkl feed up 9,5 mm/sec weight of the machine ca. 1,175 t dimensions 1620 x 1000 x 2430 mm Manual and motor operation. Side-sliding cylinder.

Condition: new, pressure: 60stroke: 250total power requirements: 7,5weight approx.: 4000messurements (LxWxH): 1.820 x 960 x 2.400table diamension: 750 x 500tappet area: 500 x 430drilling on table: 100daylight: 450working speed: 8,5retracting speed: 47rapid traverse: 26 Djb Hod Ab Ixeida Dokl

Condition: new, pressing force: 60 t, cylinder stroke: 400 mm, - Capacity 60 tons - Cylinder stroke 400 mm - Working width 900 mm Dkjb Hju Dch Reida Djl - Cylinder can be moved to the left and right - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Condition: used, pressure 120 t stroke 400 mm Dkebsttu Hbj Hida Del daylight longitudinal/sideways 1250 x 400 mm Motor output 4,0 kW liter capacity 14,5 l dayligth 900 mm weight of the machine ca. 1,3 t dimensions 1620 x 1000 x 2430 mm High-quality, hydraulic press can be used either by hand or by motor operate. Cylinder can be moved sideways. Safety valve at cylinder end position. CE marking

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) Dkeb Hor D U I Deida Dsl - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: new, pressing force: 100 t, cylinder stroke: 400 mm, - Capacity 100 tons Dobjuynpxo Hida Dskl - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder can be moved to the left and right - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Condition: new, More technical data on request ht curtain manual and automatic working Dkjb Hided Ab Igoa Dsl manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to CE rules press force:150 tohydraulic pressure:254 bartable:1200 x 750 mmram dimension:950 x 650 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:5,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.225 mmwidth:1.600 mmheigth:3.650 mmweight:8.200 kg

Condition: new, AYEL-TECH WORKSHOP PRESS TYPE WP 100 - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is moveable - Electric or manual operation - Pressure gauge - Emergency stop Dksb Hsgg Nq Ueida Dsl - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Deb Hidaed Ab Ime Djkl

Condition: new, pressing force: 60 t, cylinder stroke: 400 mm, AYEL-TECH WORKSHOP PRESS TYPE WP 60 - Capacity 60 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is moveable - Electric or manual operation Djbogg Nq Re Hida Djkl - Pressure gauge - Emergency stop - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100 Dkjbod Ab Iqj Hida Djl

Condition: new, pressure: 100stroke: 300total power requirements: 7,5weight approx.: 5400messurements (LxWxH): 1900 x 1300 x 2750table diamension: 1100 x 600tappet area: 680 x 420drilling on table: 120daylight: 500working speed: 5,5retracting speed: 37rapid traverse: 17,5 Dksb Hijd Ab Iyjda Dsl

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) Dksb Hjmr Hpcsida Djl ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Dsb Hijtqwtdsda Dokl

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400 Dkjb Hijutuy Aeda Djl