Year of construction: 1962, Condition: used, GEBA 4/B Baier hot stamping machine hot stamping press hot stamping machine Table 280 x 200 mm, ram 150 x 200 mm, table adjustment 50 mm, pressure output 4000 kP, built in 1962 Functional test: the heating plate gets warm, foot operation and button operation OK, material feed works A viewing is possible by arrangement, the machine is sold as it is, no returns! Documents are not available. Forklift and crane loading possible Dkob Hbovr Hk Uod Nrol

Year of construction: 1950, Condition: used, Weight: 135 kg Forward force: 2 t Dksbsgv U N Is Hbd Nrol Operating pressure: 52 atü Stroke: 160 mm

Year of construction: 2013, Condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press Djb Hbdefrzlms Nrokl - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton Djb Heu Saaaebd Nrskl No. of moving bolster: 1 pcs.

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t Dkeb Hot Hxczsbd Nrel dimensions of the machine ca. m

Condition: new, Year of construction: 2025, drop-through hole in table: 250 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 18.5 kW (25.15 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD Dkob Hbsvtyy Sjd Nrol • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 250 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-190 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 100 RAM - TABLE DISTANCE (MM) 650 LOWER TABLE DIMENSIONS (MM) 900X1200 LOWER TABLE HOLE DIAMETER (MM) 250 RAM TABLE DIMENSIONS (MM) 450X780 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 18.5 WEIGHT (KG) 12000 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: used, Year of construction: 1966, throat ca. 300 mm Dksb Hbd Novr Hkuorsl stroke ca. 200 mm pressure capacity max. 35 t die cushion hydr. pressure/stroke 15 t total power requirement 5,6 kW weight of the machine ca. ca 2,5 t dimensions of the machine ca. 1 x 0,9 x H 2,4 m m

Condition: used, Year of construction: 1980, pressure 160 t throat 360 mm stroke 250 mm Djb Hbdjt Hw Tlj Nrjkl total power requirement 37 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 2300 x 1200 x 3350 mm

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 800 mm, table length: 1,100 mm, stroke adjustment: 180 mm, pressing force: 200 t, ram bore: 60 mm, power: 15 kW (20.39 HP), punching force: 200 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 200 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-180 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 Dsb Hbdevtyx Is Nrskl RAM - REGULATION RANGE (MM) 90 RAM - TABLE DISTANCE (MM) 600 LOWER TABLE DIMENSIONS (MM) 800X1100 LOWER TABLE HOLE DIAMETER (MM) 220 RAM TABLE DIMENSIONS (MM) 425X650 RAM MOLD EYEBALL DIMENSIONS (MM) 60 MOTOR POWER (KW) 15 WEIGHT (KG) 9100 MACHINE DIMENSIONS (MM) (H - W - L ) • MANUFACTURER TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: used, Year of construction: 1970, pressure 180 t dimensions of the machine ca. 2 x 1,5 x 2 m strokes per minute 60 Dksb Hbdovr Hkne Nrsl total power requirement 3 kW weight of the machine ca. 4 t

Year of construction: 2001, Condition: used, press capacity 148 to material Hartmetallstangen quality Extrusionspressvorgang 0 Dkeb Hot Hw Snjbd Nrel

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 800 mm, table length: 1,100 mm, stroke adjustment: 160 mm, pressing force: 160 t, ram bore: 55 mm, power: 11 kW (14.96 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 160 AUTOMATIC STROKE ADJUSTMENT RANGE (MM) 20-160 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 80 RAM - TABLE DISTANCE (MM) 550 LOWER TABLE DIMENSIONS (MM) 800X1100 LOWER TABLE HOLE DIAMETER (MM) 220 RAM TABLE DIMENSIONS (MM) 400X600 Dsb Hovtywdjbd Nrekl RAM MOLD EYEBALL DIMENSIONS (MM) 55 MOTOR POWER (KW) 11 WEIGHT (KG) 7800 MACHINE DIMENSIONS (MM) (H - W - L ) • MANUFACTURER TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: used, Year of construction: 2017, stroke 175 mm Dkeb Hbdsvr Hkbs Nrsl

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW Dkjbjt Hw E Io Hbd Nrol weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 125 t, ram bore: 55 mm, power: 7.5 kW (10.20 HP), punching force: 125 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 125 STROKE ADJUSTMENT RANGE (MM) 20-140 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 45 RAM - REGULATION RANGE (MM) 80 RAM - TABLE DISTANCE (MM) 475 LOWER TABLE DIMENSIONS (MM) 750X1000 Dkob Hovtyvgsbd Nrsl LOWER TABLE HOLE DIAMETER (MM) 220 RAM TABLE DIMENSIONS (MM) 350X550 RAM MOLD EYEBALL DIMENSIONS (MM) 55 MOTOR POWER (KW) 7.5 WEIGHT (KG) 6000 MACHINE DIMENSIONS (MM) (H - W - L ) • MANUFACTURER TECHNICAL SPECIFICATIONS MAY CHANGE IF REQUIRED.

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg Dksb Hot Hw Ezsbd Nrol dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: new, Year of construction: 2025, drop-through hole in table: 180 mm, table width: 670 mm, table length: 950 mm, stroke adjustment: 120 mm, pressing force: 100 t, ram bore: 45 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM Dsb Hbd Novtx Insrokl • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 100 STROKE ADJUSTMENT RANGE (MM) 10-120 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 50 RAM - REGULATION RANGE (MM) RAM - TABLE DISTANCE (MM) 450 LOWER TABLE DIMENSIONS (MM) 670X950 LOWER TABLE HOLE DIAMETER (MM) 180 RAM TABLE DIMENSIONS (MM) 350X530 RAM MOLD EYEBALL DIMENSIONS (MM) 45 MOTOR POWER (KW) 7.5 WEIGHT (KG) 4600 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER CHANGES CAN BE MADE IN TECHNICAL SPECIFICATIONS IF REQUESTED.

Condition: used, Year of construction: 1971, pressure 200 t Dkob Hjt Hw Dwobd Nrsl passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) Deb Hbjt Hw Amsd Nrekl

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Dobjt Hwz Nj Hbd Nrekl Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm total power requirement 16 kW Dsbot Hwxuj Hbd Nrjkl weight of the machine ca. 10 t dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm total power requirement 10 kW Dksb Hot Hwwdsbd Nrjl weight of the machine ca. 4.500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm Dksbjt Hwuis Hbd Nrsl total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1992, pressure 75 t Dsb Hbdst Hwrzo Nrekl throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm Dksb Hbd Net Hwpysrol total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m