Condition: ready for operation (used), total length: 10,700 mm, total width: 3,700 mm, Beiteldraaibank - met 2 beweegbare beitelgeleiders - voor elektromotoren, pompen, ankers etc. Bsdpfx Aoxrhcnsaqsww Beweegbare centra Dwarsslede: 500 mm verstelbaar Middenhoogte: 1000 mm (eenvoudig instelbaar) Met Asea-motor 31 kW (variabele snelheid) Distance between centers: 7300 mm Swing over bed: 3400 mm (expandable) Swing in gap: 3400 mm Power on main spindle: 30 hp Number of speeds: 9 -> 27 rpm Chuck (3/4 pinch) -- diametre: Ø 2550 mm Max weight between centers: 12000 kg

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm Bedpfsxp Nfxox Aaqjww SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, Year of construction: 2014, Very good condition! Available immediately! Bwjdexca U Dopfx Aaqow Control: Fanuc Oi - TD Travel: X-195 mm, Z-660 mm programmable tailstock: via M function turning diameter: 254 mm tool turret: 12x coolant tank : 180L, 6 bar pump pressure electric handwheel: ,

Condition: ready for operation (used), Year of construction: 1995, turning diameter over bed 400 mm turning diameter over slide rest 210 mm Bodextfx Aspfx Aaqeww turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2013, Mazak Nexus 5000-II Horizontal Machining Centre. Serial No. 250725 (2013), Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, Max Workpiece Dimensions 800mm Dia x 1000mm Height, X/Y/Z = 730/730/740mm, 160 Tool ATC, 18,000rpm Spindle, Renishaw Probe, High Pressure Through Spindle Coolant, PMC100 Retrofit, Swarf Management System. Country of Origin: Japan Mazak Nexus 5000-II Horizontal Machining Centre. Serial No. 2223782 (2010), Mazatrol Nexus Voice Advisor Control, Pallet Size 500 x 500mm, Max Workpiece Dimensions 800mm Dia x 1000mm Height, X/Y/Z = 730/730/740mm, 120 Tool ATC, 18,000rpm Spindle, Renishaw Probe, High Pressure Through Spindle Coolant, PMC Application, Swarf Management System. Country of Origin: Japan Mazak Nexus 5000-II Horizontal Machining Centre. Serial No. 190989 (2007), Mazatrol Nexus Voice Advisor Control, Pallet Size 500 x 500mm, Max Workpiece Dimensions 800mm Dia x 1000mm Height, X/Y/Z = 730/730/740mm, 120 Tool ATC, 18,000rpm Spindle, Renishaw Probe, High Pressure Through Spindle Coolant, PMC Application, Swarf Management System. Country of Origin: Japan Mazak Palletech 36 Station High Rise Automated Pallet Transfer System. Serial No. (2010), Mazatrol Matrix Nexus Voice Adviser Control, Monitoring System, Max Work Diameter 800mm, Max Work Height 1000mm, Max Work Mass 700kg. Country of Origin: Japan Bwedpext Hciofx Aaqsw Renishaw Probe x 3

Condition: like new (used), . Face driver, make RÖHM . 1 x holder MK3 1 x holder MK4 (with wooden box) . Driver: 1 x type 12 HL 1 x type 20 HL 1 x type 32 HL 1 x type 50 HL . 2 tips Bwsdpfxoxt I Nde Aaqew .

Condition: used, total length: 5,400 mm, total width: 2,600 mm, total height: 2,550 mm, Empty weight: 15.000 kg Price: On request - Documentation available: No - Serial number: 261 511 706 - Drive system: Conventional - Power [kW]: 55.0 - Centre height [mm]: 1000 - Swing over bed [mm]: 2000 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 100 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 224 - Max. workpiece weight [kg]: 12500 - Options: Digital readout - Type of digital readout: Acu-Rite 3-A - Transport dimensions: 5400mm x 2600mm x 2550mm (l x w x h) - Transport weight [kg]: 15000kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bodpow Rfngofx Aaqoww Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER Bwsdpexp Na Nofx Aaqjw MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min Bodpfxoxr Rbts Aaqeww turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Year of construction: 2014, operating hours: 25,000 h, condition: ready for operation (used), General Data Machine weight 3900 kg Control Unit Brand FANUC Model 0i-TD Bedpfx Aaoxulg Ajqeww Main Drive Number of axis 4 This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2011, turning diameter: 530 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of spindles: 1, CONTROLS .. CNC controls SIEMENS 840 D BASIC FUNCTIONS .. design principle: vertical spindle .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. turning diameter (max): 530 mm .. worpiece length max.: 200 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes Bjdpfx Ajxt Dkwjaqoww X/Z SLIDE .. tool fixture: Turret .. number of tool positions (total): 12 .. - rotation speeds (max): 8000 /min ELECTRICAL SPECIFICATIONS .. total power consumption: 71 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9500 mm .. space requirements -front/back-: 5000 mm .. total height: 4200 mm .. total weight approx.: 13500 kg - Axes: X / Z / C spindle / A turret / including life tool - The machine features a VDI 50 turret with 12 positions. - Feed roller conveyor with pickup station - 20 bar internal cooling

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, Bwedexp Hhdjpfx Aaqow FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: used, Year of construction: 2001, operating hours: 4,689 h, Empty weight: 7.000 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Operating hours: 4689 - Drive system: CNC - Power [kW]: 15.0 - Swing over bed [mm]: 470 - Carriage turning diameter [mm]: 310 - Distance between centres [mm]: 710 - Spindle bore [mm]: 70 - Max. spindle speed [rpm]: 4000 - Options: Chip conveyor, Live tools, Turret - └ Tool magazine [pcs.]: 12 - X-axis travel [mm]: 190 - Z-axis travel [mm]: 550 Bwedpfxoxd Sk Hs Aaqew - Tool holder: VDI40 - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2021, Vertical single-spindle turning center, vertical lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of manufacture: 2021 Operating hours: approx. 1,848 Turret base unit and Y-axis slide unit HP turret drive unit for driven tools (C442) with internal coolant supply to the tool Max. speed: 6,000 rpm Nominal speed: 3,200 rpm Tool holder unit for driven tools: 12 x BMT75 Rotary workpiece transport system, O-version Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frames for O-band for workpiece diameter: 150 - 400 mm Blow-off of workpiece and clamping device (pick-up) Coolant supply: 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water - air) A cooling unit (with 2-circuit technology) regulates the machine’s thermal balance. Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filtering fineness 100 μm, with electronic and mechanical contamination indicator Chip conveyor Hinged belt design: rear discharge Bwedpfx Aovq Iwysaqew Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extraction: extraction capacity approx. 800 m³/h Rinsing gun Workpiece measurement with probe Blow-off for probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal light Axial drilling-milling head – BMT75 CC 5x angle drilling-milling heads 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic power chuck cylinder Gr.150 - with 1 media feed-through Max. clamping force 10,850 daN at 70 bar Coolant through spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick change max. = 2,200 rpm (reference speed as per DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Rinse nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 finishing external 1x 8.BMT25VL8IKX50 roughing external 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping adapter 1x 40.75V5KRVL8IKD facing head 50mm 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 drill diameter 20mm 1x 42.V522L08Ik drill diameter 22mm 1x 27.V514WNL31 drill diameter 14mm Software package Operating manual / Maintenance manual

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Bwodpfx Ajxr Rbyeaqsw Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2023, 2023 Mazak Optiplex 4020 Fiber III 6kW Laser Processing Machine With Mazatrol Control Maximum Workpiece Dimension 4,000 x 2,000mm. Maximum Load Capacity 1,600kg. Maximum Material Thickness Mild Steel 25.4mm, Stainless Steel 25.4mm, Aluminium 19.05mm. Axis Travel 'X'=4,085mm, 'Y'=2,070mm, 'Z'=110mm. Rapid Traverse 'X & 'Y'=120m/min. Positioning Accuracy 'X & 'Y'=0.05mm Per 500mm, 'Z'=0.05mm Per 100mm. Repeatable Accuracy 'X & 'Y'=0.03mm. S/No. 310080 (2023). NOTE - Loading can not be done by the crane on site, buyer responsible to arrange for loading. Buyer will require a versa lift to load to their transport. Bodpfx Aaexc H H Tsqoww With Donaldson DFPRE6 SPKTRP Dust Extraction Unit, IPG LC 170.01-A.3.5/6 Chiller Unit, Light Safety Curtains & Signal Tower. Overall Dimensions L10,744 x W4,049 x H2,010mm. Weight 21,200kg. Please note: Machine is currently under power, however it will be professionally decommissioned and moved to our storage facility for collection.

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate Bodpexrlfgofx Aaqsww -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg

Year of construction: 1981, condition: good (used), Spindle motor for CNC lathe MAZAK SLAT TURN 30, year of manufacture 1981. Bsdpsxr Dhyefx Aaqeww

Condition: used, total length: 4,000 mm, total width: 1,200 mm, total height: 1,650 mm, Empty weight: 2.000 kg Price: On request - Documentation available: No - Serial number: 7009 1560 - Drive system: Conventional - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Distance between centres [mm]: 2500 - Spindle bore [mm]: 92 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 1000 - Options: Removable bed, Digital readout - Swing over removable bed [mm]: 800 - Type of digital readout: HBM - Transport dimensions: 4000mm x 1200mm x 1650mm (l x w x h) - Transport weight [kg]: 2000kg Bwedpfew Rfnmex Aaqsw - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Machine Weight: approx. 4.8 tons Bjdpexur Nwsfx Aaqoww Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm Bwsdpfxjxrk T No Aaqow -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg

Condition: used, total length: 3,000 mm, total width: 1,300 mm, total height: 1,800 mm, Empty weight: 1.000 kg - Documentation available: No - Drive system: Conventional - Swing over bed [mm]: 630 - Distance between centres [mm]: 950 - Bed width [mm]: 400 - Options: Three-jaw chuck, Digital readout - Type of digital readout: Sony - Transport dimensions: 3000mm x 1300mm x 1800mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bodjxdb Hwopfx Aaqjww Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1960, total height: 1,500 mm, total length: 1,400 mm, total width: 6,050 mm, Empty weight: 4.500 kg Price: On request Bjdownhpispfx Aaqsww - Year: 1960 - Documentation available: No - Serial number: - Drive system: Conventional - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 71 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Removable bed - Swing over removable bed [mm]: 880 - Transport dimensions: 1400mm x 6050mm x 1500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,400 mm, total length: 5,800 mm, total width: 1,650 mm, Empty weight: 5.500 kg Bodpfx Aowxdhceaqjww - Documentation available: No - Serial number: M4L-35492 - Drive system: Conventional - Power [kW]: 9.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 900 - Transport dimensions: 5800mm x 1650mm x 1400mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 2,320 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 1.600 kg - Documentation available: No - Drive system: Conventional - Power [kW]: 4.0 - Centre height [mm]: 190 - Swing over bed [mm]: 380 - Distance between centres [mm]: 1000 - Spindle bore [mm]: 56 - Min. spindle speed [rpm]: 63 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2320mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 1600kg Bedpfx Aaew A H Tcjqsww - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum