Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Crehx Dnsvvx E Sok Tsb 01516 81 663 694 weight of the machine ca. 1 t

Condition: good (used), Year of construction: 1990, operating hours: 39,687 h, Functionality: fully functional, Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 - 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Crehx Dnkstraadj Tjb Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: good (used), Year of construction: 2005, used bending press, Graebener brand, type GRNM, year of manufacture 2005 max. bending force 16 t. tool length 1,600 mm adjustment of the lower swing arm, hydraulic 2 cylinders Crehxjvvllle Dnk Tob dimensions 5080 x 3290 x 2540 mm weight 65 t.

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Cehx Dnkouqdwxe Torb Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: new, Hydraulic workshop press LFSS type. DPM-K 1570/150 hydraulic workshop press with adjustable cylinder Special equipment: Digital display Operation via foot pedal Crohx Dneht E Dhok Tjb Technical data pressure 150 t stroke 300 mm column passage between the guides 1570 mm working speed 5,0 mm/sec retraction speed 10,0 mm/sec Engine power 11 kW Machine weight approx. 2100 kg. Space requirement approx. 2630 x 1000 x 2480 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Condition: used, Year of construction: 1991, pressure 20 t distance between columns 400 mm stroke 250 mm total power requirement 5,5 kW Crohx Dnsvwgwxok Teb weight of the machine ca. 4 t dimensions of the machine ca. 3 * 1,5 * 2,4 m

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Crjhxovvx Exo Dnk Teb +++++

Condition: reconditioned (used), Functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, ram stroke: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Central lubrication. Crjhx Dnovkfmrek Tjb Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 25200 € Cehx Dnkjvzh Its Tsrb 511.56 € 100 to fix 500 mm 700 mm 1050 mm 25 mm/s 2 mm/s 1900 mm 1200 mm 2450 mm 1300 kg 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Year of construction: 2019, Condition: new, machine/vehicle number: DF0364, pressure:20 t passage width:500 mm stroke:250 mm Weight of machine approx.:2,6 t dimensions:1200 x 1400 x 2900 mm power capacity:11 kW table plate:450 x 400 mm Table cut-out:150 x 150 mm table height over floor:900 mm Crohx Dnksfxykzo Teb max. working heidht:500 mm Return Capacity:2 t Approach Speed:300 mm/sec pressure speed:50 mm/sec speed rapid traverse:300 mm/sec Travel:250 mm Oil Tank Capacity:250 l Oil cooling (electric):1,5 kW (max) Monitor:Siemens 10 Zoll

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/150 Technical specifications Pressure 150 t stroke 300 mm table area 1070 x 290 mm column passage between guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 11 kW Machine weight approx. 1900 kg. Space requirement approx. 2110 x 1000 x 2340 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Cjhx Dsgiphnonk Terb Pressure gauge

Year of construction: 1999, Condition: used, volt 380 V Crohx Dnkovvchwe Teb weight 1,4 t

Condition: good (used), Year of construction: 1996, operating hours: 51,573 h, ram adjustment: 51 mm, table length: 510 mm, table width: 400 mm, input voltage: 400 V, Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. CABIN ON PHOTOS IS NOT INCLUDED (optional cost of cabin only 8.000 EUR) Crohsq A Uahox Dnk Tjb Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: new, Year of construction: 2019, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t Crjhx Dnkefxyigj Tsb pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, Hydraulic workshop press HIDROLIKSAN HD 60 Technical specifications Pressure 60 t stroke 400 mm Clear column width 820mm Working speed 5,0 mm/sec Retracting speed 9,4 mm/sec Engine power 3 kW Machine weight approx. 700 kg. Space requirement approx. L.W.H. 1460 x 850 x 2400 mm Equipment: Hydraulic workshop press with horizontally movable cylinder Crohxek Taggo Dnk Tsb motor hydraulic and additional hand lever height adjustable table V-block tool insert pressure gauge

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Crehx Defmavxjnk Teb Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: new, Hydraulic workshop press LFSS Typ. DPM-K 1570/100 hydraulic workshop press with adjustable cylinder Technical specifications pressure 100 t stroke 300 mm Cohx Dnsgipi Tsk Torb table surface 1570 x 260 mm column passage between the guides 1570 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1580 kg. Space requirement approx. 2630 x 1000 x 2290 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Condition: good (used), Functionality: fully functional, BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 mm max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Crohxoudltyo Dnk Tjb Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec Crohegipilex Dnk Tob retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Pressure gauge

Condition: used, Year of construction: 1992, Schaal SEP 40 control unit. Only control cabinet without machine. In tested working condition as seen on video. Disconnected from machine and in storage. Including original technical documentation. We have on stock more Bruderer, Mabu and Schaal high speed presses. Cshx Dnjigguvsk Tsrb

Condition: new, Bernardo workshop press 20 WK FH Pro Technical specifications Pressure force 20 to Piston stroke 185 mm Table width 170 mm Passage (S) 510 mm Crshx Dnod Du T Rok Tob Through (F) 130 mm Distance from cylinder - table (F1) 40 mm Distance from cylinder - table (F2) 965 mm Cylinder movable (M) 175 mm Width (A) 730 mm (B) depth 560 mm 1 (C) height 1525 mm Height 1630 mm 2 (D) Weight approx. 112 kg Properties • Fitted with sliding left and right cylinders • To align, presses, bending, assembling gears, disks, etc. • Fitted with foot pedal and hydraulic • hand pump for delivering piston • Standard Edition Prism to shaft alignment • Standard equipment with automatic piston return through integrated return spring • Height-adjustable table with locking bolts • Large dimensioned pressure gauge to read pressure • including two-stage hydraulic pump • Sturdy construction with welded steel frame

Condition: good (used), Year of construction: 1993, operating hours: 59,000 h, Functionality: fully functional, machine/vehicle number: Revised 2024, table length: 760 mm, table width: 650 mm, BRUDERER BSTA 50 High Speed Automatic Punching Press Max. Pressure: 500 kN 50 T Speed range: 100 – 1070 SPM Year of production: 1993. Revised 2024 Hour-meter: 59295 h Machine tested with non-stop run 1.000.000 strokes Fitted with roller-gripper feed unit BBV 190/85 on left-hand side. Max. strip width: 160 mm Max. strip thickness: 4 mm Max. feeding pitch: 85 mm Feeding cycle: 180 Degrees. Strip running height from clamping plate: 60 – 140 mm Ram height adjustment: 64 mm Bolster (Clamping) plate dimensions: 760 x 650 mm Hole in table: 310 x 90 mm Bed opening: 730 x 250 mm Max. Tool width clearance between columns: 770 mm Max. Strip clearance width: 256 mm Connected load: 25 kW Cshxjq Hu Igj Dnk Torb Power: 380 V 50 Hz Control voltage: 24 V Machine dimensions: H 3040 x W 2400 x D 1278 mm Weight of machine: cca. 7800 kg Electrical cabinet and control. Fault monitoring system. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass. Also on stock high speed presses: Mabu, Schaal and other Bruderer models.

Condition: new, Hydraulic workshop press LFSS Typ. DPM-K 1570/150 hydraulic workshop press with adjustable cylinder Technical specifications pressure 150 t stroke 300 mm table surface 1570 x 260 mm column passage between guides 1570 mm infeed speed 9,0 mm/sec Crjhx Dnjgx Uvajk Tjb working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 11 kW Machine weight approx. 2100 kg. Space requirement approx. 2630 x 1000 x 2480 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Condition: used, Year of construction: 1982, operating hours: 24,864 h, Functionality: unexamined, total height: 1,800 mm, ram adjustment: 50 mm, total width: 1,250 mm, table length: 250 mm, table width: 460 mm, Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Crehxsrk Egzs Dnk Tob Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. Packing and loading included. Feeding device not included, if needed contact for more information.

Condition: ready for operation (used), Year of construction: 1976, Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Crjhx Dnkjktirue Tob Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 23000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass. Machine dismantled ready for delivery. Came from running production.