Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min Djbevu E Iqeu Tg Amsut total power requirement 20 kW

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, Equipment: second-hand vehicle warranty, TECHNICAL CHARACTERISTICS: Press Model: T40 CE Year of construction: 1999 Nominal force: kN 400 Nominal stroke: mm 2.6 Adjustable stroke: mm 8÷78 Stop position: TDC Ram adjustment: mm 60 Stop time: ms 110 Safety distance (1.6 m/s): mm 177 Strokes per minute: N° 145 Max. insertions per minute: N° 55 Max. surface mould: mm 300x500 Max. Height of closed mould: mm 332 Min. Height of closed mould: mm 297 Debu Tov R S Uvog Amsut Upper mould mass: Kg. 40 Installed power: KW 3.05 Voltage: V 400 Auxiliary voltage: V 24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 1,950 Complete with user manual and CE conformity Six (6) month warranty on mechanical parts Twelve (12) month warranty on the electrical panel NEW COMPONENTS INSTALLED: • Electrical panel; • Pedals; • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Motor pulley; • Air regulator; • Overload disk; • Reinforced surface on CNC machine

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Dusbu Tohu H Dpeg Amet Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Table Dimensions: 2000 x 1000 mm Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW Duobu Tgjiulkqj Amjt weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, Double column hydraulic press MAE type HY-DSF 160 ZU 63 Year of manufacture 1970 Pressure force 160 tons. Column width 1300 mm Table surface 1250 x 1000 mm Pedal surface 1250 x 1000 mm Pedal stroke approx. 600 mm Installation height max. 1000 mm Dobu Tovt D D Ieg Amsut Drawing cushion 63 tons. - hydraulic drawing cushion under the table - SICK light barrier - Control cabinet next to it Space required for the press L x W x H 2300 x 2000 x 4700 mm Weight of the machine 17 tons. good condition

Condition: used, Year of construction: 1994, Hans Schoen NH65 pressure 65 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dobu Tovrk Epeg Amout +++++

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,000 mm, retraction force: 100 t, Equipment: safety light barrier, H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 200 TON H TYPE SERVO HYBRID HYDRAULIC PRESS TECHNICAL SPECIFICATION – EHP TYPE H Type Steel Structure with 8 Guided Working Table Dobu Tsv D Rv Eeg Amsut BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 200 TONS CAPACITY (POT) 100 TONS MAIN TABLE SIZE 1000 x 800 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 600 mm STROKE (POT) 200 mm MIN. OPENING HEIGHT 200 mm MAX. OPENING HEIGHT 800 mm STRESS RELIEF after WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar MOTOR POWER 30 kW – HAWE – SERVO MOTOR FREE FALLING SPEED 150 mm/sec. PRESSING SPEED 15 mm/sec. ASCENDING SPEED 200 mm/sec. RAM CYLINDER DIAMETER Ø 320 mm – Ck45 POT CYLINDER DIAMETER Ø 230 mm – Ck45 AUXILIARY CYLINDER NUMBER 2 pcs. PRESS HEIGHT 4400 mm PRESS DEPTH 1800 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1150 mm ENGINE Protection Class IE3 PRESSURE FILTER PARKER USED VALVES HAWE FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATION ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL PLC SIEMENS S71510 TOUCHSCREEN PANEL SIEMENS KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS PILZ– 2 pc. APPROXIMATE WEIGHT 10 TONS

Condition: excellent (used), table height: 580 mm, table width: 900 mm, overall weight: 5,600 kg, pressing force: 80 t, Power 80 Tn Nominal speed 65 strokes / min Variable speed 34 - 85 strokes / min Stroke 14-150 mm Dsbu Tg Ajv A S Utjmout Distance sliding table 480 mm Work table 580 x 900 mm Sliding surface 380 x 560 mm Weight 5,600 Kg Measurements (width x length x height) 1610 x 1540 x 2930

Condition: new, weight approx.: 1.400motor power: 5,5oil filling: 34performance of pump: 20messurements (LxWxH): 2.000 x 950 x 2.550pressure: 150stroke: 400column width: 1250 Workshop press: - Motor & Hand Control - Laterally sliding cylinder - Pump Hema of the Caproni Dusbu Tolzm E Hog Amst - Manometer - Operating instructions - CE Made in Turkey Option:  Stand width: 1400 (EURO 722 surcharge)

Year of construction: 1975, Condition: used, pressure 25 t throat 250 mm stroke 300 mm total power requirement 12 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,4 x 1,3 x 2,3 m Duebuoh U Dmve Tg Amjt

Condition: used, 2-column hydraulic press OWN CONSTRUCTION Year of construction approx. 1980 Pressure force 6 ton. at 180 bar Pressure force 5 ton. at 150 bar Pressure force 4 ton. at 120 bar Pressure force 3 ton. at 90 bar Table top 400 x 340 x 30 mm Plunger plate 410 x 350 x 28.5 mm Table usable area between the guide pillars 305 x 245 mm Plunger stroke 140 mm Installation height max. 320 mm Column diameter 35 mm Table height above floor 1050 mm Hydraulic operating pressure max. 180 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz - Infinitely variable pressing force adjustment via handwheel - Hand switch with two-hand simultaneity control - Enzel stroke with automatic return stroke - Emergency stop - Stroke infinitely adjustable via limit switch - Hydraulic unit in substructure - Mobile with pallet truck Duebu Teu Swbzog Amst Space requirement L x W x H 920 x 850 x 1700 mm Weight 360 kg. good condition

Condition: excellent (used), Sell well preserved Helmerding eccentric press Very little used! Dobu Tg Ajfdnw Hjmout

Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 2,500 mm, retraction force: 200 t, Equipment: safety light barrier, FOR 400/200 TON H TYPE HYDRAULIC PLASTERING PRESS TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING KESTLUB CAPACITY (RAM) 400 TON CAPACITY (POT) 200 TON MOVABLE TABLE DIMENSIONS 1200 x 1500 mm FIXED TABLE TABLE DIMENSIONS 1200 x 1500 mm LOWER EXTRACTOR TABLE DIMENSIONS 1050 x 1330 mm PARALLELITY TOLERANCE 120 micron/mt. HORIZONTAL TOLERANCE 60 micron/mt. STROKE (RAM) 1000 mm STROKE (POT) 350 mm MIN. INTERMEDIATE SPACE 200 mm MAX. INTERMEDIATE SPACE 1200 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) PROPORTIONAL SPEED and PRESSURE APPLICATION The system is designed as proportional speed and pressure feature. By entering different speed, stop and pressure values at different points of the pressing process, the effect of material and mold deformations on the work done is minimized. MAX. WORKING PRESSURE 250 Bar – Adjustable from Proportional Screen TOTAL MOTOR POWER 37 kW– IE3 MAIN PUMP 140 cm³ – REXROTH – Piston Power Regulated MOVING TABLE FAST Descent Speed 50 ~ 400 mm/sec. – Adjustable from Proportional Screen MOVING TABLE PLASTERING Speed 5 ~ 21 mm/sec. – Adjustable from Proportional Screen MOVING TABLE RETURN SPEED 50 ~ 450 mm/sec. – Adjustable from Proportional Screen POT TABLE FAST Descent Speed 10 ~ 40 mm/sec. – Adjustable from Proportional Screen POT TABLE RETURN SPEED 10 ~ 70 mm/sec. – Adjustable from Proportional Screen MAIN CYLINDER INNER DIAMETER Ø 450 / Ø 390 mm – Ck45 POT CYLINDER INNER DIAMETER Ø 320 / Ø 250 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS Ø 80 / Ø 50 mm – Ck45 APPROXIMATE HEIGHT OF PRESS 5600 mm APPROXIMATE WIDTH OF PRESS 3250 mm APPROXIMATE DEPTH OF PRESS 2200 mm LOWER TABLE HEIGHT FROM THE GROUND 1400 mm PRESS SIDE WINDOW DIMENSIONS 500 x 1300 mm PRE-FILL VALVE NG 200 – hawe HYDRAULIC UNIT REXROTH COOLING SYSTEM SUCTION – CIESSE Debu Tgjv Dvv Re Ameut OFF-LINE FILTRATION REXROTH ENGINE CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH AIR FILTER REXROTH – 10 MICRON PERMEABILITY RETURN FILTER REXROTH – 25 MICRON PERMEABILITY OIL AND HEAT INDICATOR REXROTH VALVES USED REXROTH FILTER CONTAMINATION WARNING ELECTRONIC CONTROLLED LUBRICATING STYLE AUTOMATIC – (ADJUSTABLE FROM THE SCREEN) RAM STROKE ADJUSTABLE FROM THE SCREEN POT STROKE ADJUSTABLE FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. PARKER or ORDEL PLC APPLICATION DELTA TOUCH PANEL SCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER RADIATION BARRIERS KEYENCE, LEUZE, PILZ or SICK – 2 tk. APPROXIMATE WEIGHT 25 TONS

Condition: excellent (used), Eccentric press GALATO MOD. 100T/FZ/TL . Cycle engagement with brake-clutch group. 4-guide hammer. Nominal force: Ton 100 Copi per min: 60 Adjustable stroke: mm 8-108 Plan size: mm 900 x 580 Hammer size: mm 510 x 350 Hammer adjustment: mm 70 Centre wing protrusion: mm 300 Hole diameter: mm 150 Hammer hole diameter: mm 50 Distance between plan and hammer: 500 Distance between shoulders: mm 370 Dobu Tevw A Hijg Amsut Motor power: Hp 10 Weight approx: Kg 6200 Dimensions: mm 1300 x 1700 x 2650 Front protection with photocells

Condition: ready for operation (used), Year of construction: 1950, Sale only within the EU member states! No private sale MAE can be viewed with pleasure. Duebu Tjpz Ht Njg Amot Any warranty right is excluded. For the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the observance of all safety and environmental protection requirements mentioned in the and environmental protection requirements mentioned in the accident prevention regulations. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools Cyn79beasd as well as for compliance with all safety and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: used, pressure / t distance between columns / mm stroke / mm This ram was dismantled from the MAE HY S 315s press Data from the machine to which Ram belonged: Press pressure devi. 315,000kg pressure up Ram stroke 800 mm Projection / table depth 720 mm Installation height 800 mm Table width 1200 mm Table height 1200 mm Total height / width / depth 4200 mm / 2200 mm / 4350 mm Dusbu Tg Aon Uzbremjt Weight 30 tons Machine body as seen on the low loader is 4 tons It's just the pestle!!!

Condition: new, pressing force: 100 t, cylinder stroke: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm Dujbu Tgegp Dc Re Amst - Cylinder is movable - Can be operated electrically or manually - Pressure indicator - Emergency stop - 400V

Condition: as good as new (ex-display), Year of construction: 2016, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec Duobohtm E Neu Tg Amst working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm Duebu Tou Nfvujg Amst passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Year of construction: 2025, operating hours: 10 h, Condition: new, Functionality: fully functional, machine/vehicle number: C1-25sE_1, CrimpOne C1-25sE - Made in Finland Servo-electric hose press with spindle drive Technical data Main technology: AC servo ball screw Max. pressing force: 250kN Crimp range: 10 - 54 mm Max. hose size: 1¼ inch Master die D / L: 84 / 78 mm Servo motor: 5kW Repeatability: 0.01 mm Max. opening: +100 mm Max. feed channel: 45 mm Max. closing speed: 80 mm/s Max. opening speed: 80 mm/s Max. crimping speed: 10 mm/s Length: 1250 mm Width: 850 mm Dsbu Tg Aovr Dnkjmeut Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Condition: excellent (used), Year of construction: 1979, Functionality: fully functional, pressing force: 500 t, table width: 1,600 mm, table length: 900 mm, ram stroke: 400 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Dujbujv E Nlzj Tg Amjt

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Debu Tsgrnaqsg Amjut Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: good (used), pressing tool, sheet metal former, forming tool, edging tool, folding tool, bending tool, die, die tool -Bending tool: Press tool for press, 3-part solid design -Hole: Ø 40 mm -Length: 300 mm / 250 mm -Angle: 90° -Dimensions: see photos / technical drawing -Price/Delivery: complete Dujbjvm Sz Isu Tg Amjt -Transport dimensions: 350/345/H225 mm -Weight: 75.1 kg

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Duebu Tofhcc Uog Amet Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Year of construction: 1992, Condition: used, Technical details: voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) Djbu Tg Asvc Atgomjut DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *