Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Duoln H Uhjda Ha Nsnet Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: new, Year of construction: 2025, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Machine features For mounting and removing bearings, sleeves and pins High-quality cast iron Table adjustable in four positions Can be used in all workshops Technical data Pressing force 3 t Maximum arbor height (from fixed table surface) 310 mm Arbor reach 145 mm Fixed table dimensions 190×180 mm Swivel table dimensions Ø166×20 mm Duoln H Uhsv Hqfrsnot Holes in swivel table 18, 25, 36, 46 mm Arbor dimensions 38×38 mm Base dimensions 455×195 mm Height after arbor lowering 570 (without lever) Weight 63 kg Manufacturer: Cormak

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Djln H Uhevvh U Aonout Year of manufacturing: 1988 Under power: Yes 630 kN --- ---

Condition: good (used), Press control make Brankamp, Duoln Hjbu N N Ns Uhnot was dismounted out of a machine because it got a complete new control. We have not tested it, but it was in operation until disassembling. Could be used as spareparts for the same type.

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - hydr. Tool clamping system - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements - Set of hydraulic rolling block bars for simplified tool changing Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Djln H Uhsvbk Rwonout Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Year of construction: 1971, Condition: good (used), Pressing force: 63 t Table: 660 x 480 mm ram: 450 x 280 mm Dolneh N S Sdo H Uhnjut throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, coil width: 200 mm, overall weight: 80 kg, material width: 200 mm, roll width: 64 mm, sheet width: 200 mm, material thickness: 3 mm, brake voltage: 220 V, warranty duration: 12 months, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Delovptz Ion H Uhnsut Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: new, Year of construction: 2025, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Machine features For mounting and removing bearings, sleeves and pins High-quality cast iron Table adjustable in four positions Can be used in all workshops Technical data Pressing force 3 t Maximum workpiece height 285 mm Distance from piston axis to column surface 165 mm Table diameter 163 mm Arbor dimensions 38×38 mm Largest hole in the table 44 mm Height after arbor lowering 615 mm Base dimensions 455×300 mm Weight 65 kg Doln Hev Hqdhj Uhneut Manufacturer: Cormak

Condition: good (used), Karl Pfisterer, le principal fabricant de Electro-hydraulique. presses à balles Le sabot du câble me presse beaucoup d'accessoires. Tout était bien entretenu. Accessoires voir liste. (Aucune garantie de complétude n'a été trouvée sporadiquement et tout était là)! Boîte en bois pratique. Djlnod I Hffo H Uhnout Pince de câble Plus d'articles - neufs et d'occasion - peuvent être trouvés dans notre magasin! Frais de port internationaux sur demande!

Condition: like new (used), Year of construction: 2024, Capacity: 2.500 kN Specification: Threshold setting: Reading begins at 1% of capacity (75 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (3.750 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Deln Hsfpwmps Uhneut Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 185 L x 200 W mm, height app. 127mm Height sets to 5.0000" +/- 0.0005" Weight: app. 13 kg inckuding carrying box

Condition: like new (used), Year of construction: 1989, operating hours: 810 h, Functionality: fully functional, machine/vehicle number: 892161, total height: 2,860 mm, sheet thickness (max.): 6 mm, total width: 2,425 mm, overall weight: 9,000 kg, ram adjustment: 61 mm, pressing force: 160 t, Here you have the unique opportunity to buy a Feintool GKP F 160 that has hardly been used. Feintool GKP F 160. The machine has just 810 hours. As you can see from the pictures, the machine is in top condition. We purchased the press in 2019 but, like its predecessor, never used it. It was tested by us without tools and the machine works. Dsln H Ujumigqshnsut Technical data of the FEINTOOL GKP F 160 fine blanking press Maximum sheet thickness: 6 mm Maximum sheet width: 210 mm Total force including auxiliary functions: 160 t Shearing force: 100 t Hydraulic counterweight force (upper table): 1-40 t Hydraulic force of the ring jaw (lower table): 12-50 t Ejector force (pump pressure): 4-8 t Hydraulic shearing force: 7.5 t Pneumatic shear force: 6.6 t Stroke of the pusher: 61 mm Maximum number of pusher strokes: 72/min Minimum number of pusher strokes: 18/min Motor power: 11 kW Pump power: 4 kW Air connection: 6 bar Dimensions (L x W x H): 2380 x 1870 x 2860 mm Weight of the GKP F 160 machine: 9000 kg

Condition: used, AGOSTINO COLOMBO G250 Dusln H Ujv Sya Ajhnot

Condition: good (used), Nominal force : 63 tN Force point : 23 mm Cadence : 70 g.p.m. Height adjuntment of slide : 70 mm Course. : 12-110 mm Tool holder hole : 50 mm Ejector course : 56 mm Neckline : 250 mm Dimensions slide base IDxFA: 500x350 mm Dimensions of the movable plate IDxFA 200x500 mm Movable plate thickness 85 mm Dusljgrk Ayon H Uhnet Height between slide and movable plate 250 mm Opening between uprights 415 mm Movable plate hole diam. 280 diam 250 mm Movable plate ring hole diam.140 mm Total energy: 115 kgs Steering Wheel straps : B-92 Table dimensions IDxFA 810x520 mm Table hole 335x250 mm Pressure required for clutch or trigger 5,5 kg/Ca Main engine 75 Cv 1450 rpm Connected to 380 v Frequency 50 Hz

Year of construction: 1987, Condition: good (used), Max. tool load: 2.000kg Tool size: Width: max. 800mm Length: max. 1.160mm Dusln H Uhjcwr Iuenjt Table over floor: 900 - 1.300mm, hydraulic adjustable Performance: - Table 360° rotatable - 4 pc. roller conveyor - rotatable stopper at conveyors - hydraulic lifting

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Delnogr Ur Rs H Uhneut Retraction speed 135 mm/ seg Engine power 30 cv

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Dujln H Uhjgpxc Ssnot Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Delopvlf Son H Uhneut Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other • Rotating wedge coupling • Foot release Dujlsvnrhwjn H Uhnst • Control and protective screen as new, only used very little • Without table

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Dsln H Uod E U Nnshnsut Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Dujlnsfpwk Rs H Uhnjt Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box with analog output

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Djlnenl Sno H Uhneut Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Dueln Hsdhzf Ie Uhnet Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: good (used), Year of construction: 1986, Power: 400kN Doln Hjthdbno Uhnsut Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Weight of mold: max. 7.000kg Power main motor: 7,5 kW Stroke: 1.000 mm - With movable bolster - Bolster can be swiveled Weight: app. 7.000kg

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication Dujlned A Hbcs H Uhnst - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Condition: ready for operation (used), Machine has been rebuilt in 1981 and got control for hand working Power: 32 to Size of bolster: 700 x 650 mm Overhang: 340 mm Stroke: 16 - 63 mm Ram adjustment: 10 mm Delnek S Efhe H Uhnsut Other can be used for safe 2-Hand working euqipped by safety valve Herion Xsz 20 table can be moved in height Stand alone control panel machine and control assembled on solid steel plate