Condition: good (used), Smeral LZK 1000 Press force 1000 t Stroke 220 mm Installation height 1040 mm Fpobowfhhgo E Ufc Usg Stroke rate 100/min Ram adjustment 10 mm Table area 1000 x 950 mm Ram area 840 x 750 mm Motor 55 kW Total weight 52,000 kg

Condition: used, Single-column hydraulic press with die cushion HIDROGARNE Type CF 80 Machine No. 2955, Year of manufacture 2015 First commissioned 2016 Pressing force 80 tons Slide stroke 450 mm Thrust 340 mm Installation height 650 mm Table area 800 x 550 mm Table bore Ø 55 / 30 mm Slide area 650 x 400 mm Die cushion force 25 tons (250 kN) Ejector force 25 tons (250 kN) Die cushion stroke 200 mm Die cushion area 500 x 380 mm Table height above floor 910 mm Max. hydraulic operating pressure 280 bar Hydraulic tank capacity 130 liters Advance speed in rapid traverse 110 mm/sec. Pressing speed 10 mm/sec. Fpjb E Ufswd Sy Rec Ujg Return speed 160 mm/sec. Drive power 7.5 kW Power supply 400 V, 50 Hz - Operation and programming via SIEMENS touch panel - Ram stroke and press force programmable via the control system - Pressure and travel cut-off - Continuously programmable pressure hold time - Ram and die cushion equipped with direct travel measuring system - Die cushion under the table can also be used as an ejector - Table surface with holes for die cushion push rods - SICK light barrier as an anti-interference device for safety operation - Control cabinet with electrical control mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Foot switch operation only - Operating instructions and electrical diagram available - Accident prevention regulations for manual insertion work Press footprint L x W x H 1500 x 1260 x 2640 mm Weight 3.4 tons In very good condition

Condition: excellent (used), Year of construction: 1963, Functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Fpjb E Ufcequqpae Usg

Condition: used, Pressing force: 6 t Fpeb E Ufcjwffi Uo Ujg

Condition: used, machine/vehicle number: 862019, total height: 3,360 mm, stand width: 2,400 mm, table height: 860 mm, distance between side stands: 650 mm, table width: 650 mm, table length: 650 mm, control cabinet width: 1,000 mm, control cabinet length: 500 mm, control cabinet height: 2,000 mm, pressing force: 70 t, input voltage: 380 V, load capacity: 10,000 kg, Used 4 column eccentric press. Runs silently and beautifully. Controls adjusted. For sale due to surplus. Comes with associated decoiler and Zenner&sommer servo feeder. Equipped with automatically closing protective doors Fpob Eovug S Do Ufc Uog

Condition: good (used), Functionality: fully functional, total height: 3,500 mm, total width: 2,800 mm, total length: 1,200 mm, pressing force: 300 t, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons Feb Eswhc H Aj Ufc Uspg

Condition: good (used), Functionality: fully functional, Parker Parkrimp II 83 CE Crimping Machine for High-Pressure Hoses (Hydraulic Hoses) Pressure force: 125t (at 5,000 PSI max) Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY Series (611HT, 801, 836) Weight: 450kg Fpob E Uev Rnnljfc Ujg #8247

Condition: good (used), Used workshop press from top brand Enerpac Type: RP 100 Capacity: 100 tons Fsbewc Nlue E Ufc Ujpg

Condition: ready for operation (used), Functionality: fully functional, For sale is this hydraulic test press from the tool shop with a press force of 250 tons. Table dimensions: 1800x2230mm Machine dimensions: 2200x2230mm Febjwhnppj E Ufc Ujpg Internal dimensions (area without columns): 1250x1630mm Stroke: 470mm Total height: approx. 3200mm Total weight: approx. 25 tons The machine can be inspected and demonstrated at short notice in Solingen. Net price: EUR 25,000 Due to its heavy weight, we cannot load the machine. Loading must be arranged by the buyer. The offered machine is sold without warranty. Returns are excluded. We are not liable for errors resulting from errors in the advertisement.

Condition: used, Year of construction: 2001, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 651 26 2F, total height: 2,000 mm, type of input current: AC, control voltage: 24 V, material thickness: 2 mm, The machine is in good condition and was still running until recently. However, an inspection beforehand is recommended. Fpsb E Ufewifauoc Ujg

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 6000110, overall weight: 3,850 kg, pressing force: 60 t, Equipment: documentation/manual, Dirinler eccentric press in good condition, last commissioned in 2024. Feb E Ufjwhbxqec Uepg Lower hold-down clamp. Problem with front safety barrier.

Condition: good (used), Year of construction: 1997, Functionality: fully functional, pressure: 300 bar, oil tank capacity: 220 l, ID43737 Fpjb E Uswhcmpefc Ueg Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Year of construction: 2005, Condition: used, SCHULER HYDRAP SH 630 - 1.6 x 1.3 (2005) Total weight 74,000 kg Rated force 6,300 kN Max. stroke length 600 mm Mounting height 900 mm Closes quickly 500 mm/s Feb E Ufcowf D Shs Uepg Max. working speed 23 mm/s Min. working speed 51 mm/s Base and tool max. (xH) 2,280 x 1,200 mm Base and tool min. (xH) 1,250 x 600 mm Tool height min. 300 mm Total tool weight max. 2,500 kg Total tool weight max. 5,000 kg Permissible eccentric hydraulic press load left right Permissible eccentric load front rear 490 kNm 250 kNm Installed power 295 kW Rated current 565 A Voltage 400 V Frequency 50 Hz Operating hydraulic pressure 278 bar Total oil volume 5.185 l Oil type HLP 68 in accordance with DIN 51524

Condition: used, Year of construction: 1979, Empty weight: 10.000 kg Price: On request - Year: 1979 - Documentation available: No - Serial number: 180 - Control: Conventional - Motor power: 13.0kW - Table width: 800mm - Table length: 1000mm - Ram width: 500mm Fpsbowczlge E Ufc Usg - Ram length: 650mm - Min. stroke: 20mm - Model: Eccentric - Max. stroke: 160mm - Height adjustment: 140mm - Power: 160.0ton - Transport weight [kg]: 10000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2004, Functionality: unexamined, machine/vehicle number: 17441, installation height: 500 mm, pressing force: 6 t, overall weight: 1,450 kg, stroke distance: 250 mm, pressure: 202 bar, LAUFFER Press Machine Type: EK S 3 Year of Manufacture: 2004 Weight: 1450 kg Maximum Pressing Force: 63 kN Maximum Retraction Force: 37 kN Maximum Stroke: 250 mm Maximum Working Pressure: 202 bar Fpsbewhw Hke E Ufc Usg Installation Height: 500 mm Overtravel: 10 mm Overtravel Time: 54 ms Safety Distance: 140 mm Pickup at our Haldensleben location. Loading/transport is available as an option.

Condition: used, Year of construction: 1985, Make: Reis Type: TUS 160 OK 100 Year of manufacture: 1985 Control: Conventional Country of origin: Germany Delivery time: approx. 4 weeks Fpob E Ufcsgv Ikho Ueg Freight basis: ex stock Technical details Pressure 100 T column passage 1620 mm Table + ram 1800 x 1550 mm Open height 1800 mm Swivelling table load 6000 kg Table load top (without swivelling) 10.000 kg Table load bottom 20.000 kg Stroke 1500 mm Machine weight approx. (without operating materials) 22 T Dimensions L x W x H 5642x2940x5840 column diameter 180 mm Oil tank 400 L Additional information: Ejector in table

Condition: used, Year of construction: 1997, Technical specifications: Max. pressure force: 15 t Thrust: 160 mm Ram strokes: 120 rpm Adjustable ram: 40 mm Adjustable stroke: 4 - 60 mm Motor power: 1.1 kW Fpeb E Ufjwd Nausc Ujg Dimensions (W x D x H), approx.: 1130 x 1000 x 1780 mm Weight, approx.: 980 kg

Condition: used, Year of construction: 1999, installation height: 420 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, pressing force: 500 t, power: 100 kW (135.96 HP), controller manufacturer: SIEMENS, lifting height: 225 mm, coil width: 300 mm, material width: 300 mm, ram stroke: 225 mm, tool height: 420 mm, CONTROLS .. PLC SIEMENS PRESS DESIGN .. drive system: hydraulic SLIDE .. total force (nominal): 500 to .. stroke: 225 mm .. stroke rate (max.): 60 /min SLIDE (HYDR. PRESS) .. approximation velocity max.: 200 mm/s .. working velocity min.: 15 mm/s .. working velocity max.: 44 mm/s .. return velocity max.: 200 mm/s COUNTER RAM .. nominal force: 100 to .. stroke: 30 mm V-RING .. nominal force: 200 to TOOL DIMENSIONS .. shut height max.: 420 mm .. ram adjustment: 100 mm .. distance between columns (H-frame): 880 mm .. passline opening (free passage in side columns): 470 mm Feb E Ufcewdv Swo Ujpg .. range of transfer pins - in strip direction: 394 mm DECOILER .. design: cradle .. sheet width max.: 300 mm LEVELLER UNIT .. sheet thickness max.: 12 mm STRIP-FEEDER .. feeder type: grip feeder CROP SHEAR .. cutting force: 500 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 100 kW Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016

Condition: used, Year of construction: 1991, Functionality: fully functional, We offer for sale a used hydraulic press from the manufacturer ACM - Inter Hydro (part of the SIF group). Technical data: • Model: DZ8024 • Year of manufacture: 1991 Fob E Ufcsv Exxqo Uspg • Drive: Hydraulic • Equipment: Roller conveyor system for material feed, hydraulic control unit Description: The DZ8024 is a robust hydraulic press, ideal for processing metals and other materials. Thanks to the hydraulic drive, it offers a high pressing force, while the roller conveyor system ensures efficient material feed. The machine is ideal for industrial applications such as the production of metal profiles, cutting or bending. Condition: The press is in working condition. Regular maintenance has been carried out and all relevant documentation is available.

Condition: good (used), Year of construction: 1984, Functionality: fully functional, Pressing force 75 t , throat depth 300 mm , installation height 450 mm , table 80 x 620 mm , ram 475 x 180 mm , hydraulic multi-plate clutch , fixed table , wheel transmission Fpob Eetwcqfo Ufc Ueg

Condition: new, pressing force: 100 t, cylinder stroke: 300 mm, – Capacity 100 tons – Cylinder stroke 300 mm – Working width 1070 mm – 2 speeds Fjb E Ufswg Smioc Uepg – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation – 400 V

Year of construction: 1998, Condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Feb E Ufcewhp Nde Uopg

Condition: used, Year of construction: 1983, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s height over floor 6,8 m depth of the foundation 3,0 m power requirement 120 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m Fpsb E Uovuk Tlofc Usg as is where is, stored in dismantled condition

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: H98 - 2903, We are offering a used but fully functional hydraulic horizontal press of the Dunkes WPHF - STS 100 model for sale. Technical data: Machine no.: H98 - 2903 Pressing force: 1000 kN Max. oil pressure: 240 bar Fsbsv Exp Ne E Ufc Uepg Motor power: 22 kW Overtravel: 75 ms at 5 mm Safety distance: 150 mm Condition: The machine is used but is in fully functional condition.

Year of construction: 1990, Condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Table size sidewise 1220x550mm Fpsb Eogy Hzpj Ufc Usg Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend