Condition: ready for operation (used), total length: 9,250 mm, total height: 3,050 mm, net weight: 33,500 kg, nominal power: 60 kW (81.58 HP), total depth: 2,850 mm, 2 rolls are mechanically driven with driveshafts = no slip possible of workpiece Crslq Aev Taptsg Hhob Hydraulic upper lower movement of rolls and support bearing Number of rolls: 4 rolls Roll capacity cold: 3100 x 40 mm Roll dia upside: 450 mm Dia under roll - side rolls: 350 mm Pre-bending: yes

Condition: good (used), Year of construction: 2004, operating hours: 73,056 h, Functionality: limited functionality, machine/vehicle number: A0060A0266, Machine operating hours: 73,056 h Max. punching force: 220 kN Punching working area: 2,535 x 1,280 mm Max. sheet thickness: 8.0 mm Total connected load: 29 kVA Last commissioned: March 2024 Standard equipment Machine • Sturdy C-frame • Coordinate guide with integrated linear magazine • 21 tool stations • 3 clamps • Automatic part chute 500 x 500 mm Punching head • Hydraulic single-tool holder, 360° rotation • Adjustable hold-down force • Programmable hold-down device • Spray lubrication for punches • Punch slug extraction Safety • CE mark • Multi-beam light barriers • Rapid hydraulic shutdown • Bowing detection Extended equipment • Brush table with loading and unloading aid • Height-adjustable, individually opening clamps • Reloading cylinder • Vibration-damped installation • Chip conveyor Available additional options • Trumalift Sheetmaster • Trumagrip 2500x1250 mm • Trumatool 40 • Trumasort R4 • Trumasort L The machine is available immediately. Due to the last commissioning more than a year ago, malfunctions may occur during commissioning. The sale is ex works: dismantling, removal, loading, and transport are at the buyer's expense. Crolqewduuks Ag Hhjb

Year of construction: 2013, operating hours: 584 h, Condition: excellent (used), Functionality: fully functional, Pipe forming machine in very good condition with few operating hours. Pipe diameters from 20 to 400 mm are possible. The technical specifications can be found in the images. The machine is ready for operation and can be inspected under power. Cslq Agswdui Us Hhorb Further information is also available on the Wecotech website.

Condition: excellent (used), Year of construction: 2002, N. 1 ELECTRIC – HYDRAULIC PIPE BENDER MOD. SWING – 6 AXIS VGP 3D YEAR 2002 CE EQUIPPED WITH: - SWING EARLY CORE EXTRACTION - SWING RVS310 VARIABLE RADIUS - SWING FRAME EXTENSION - SWING/SWING3 RIGHT-LEFT COUNTER SLIDE - VGP3D SW 3-DIM. PART FACT PROGR. STANDARD CONFIGURATION: - Characteristics, weights, measurements, capacities and performances of the machines are not binding and can be modified without notice. - 6-axis pipe bending machine with right and left bending direction in automatic cycle. - Management of a maximum of 4 + 4 radii. - Different or different diameters or combinations, in programmable automatic cycle with reference stop of the pipe in the clamp and relative pre-closure. - Brushless motors on the X, Y, Z, Q, and R axes. - Air-oil heat exchanger. - Automatic core lubrication. - Core extraction axis with rapid adjustment. - Predisposition for integration into a flexible production system. - Configurable with manual or automatic loading and unloading. - Safety fence with photocell at the access gate - Automatic right and left bending direction. - 4 right tools + 4 left tools without equipment set-up. - 5 controlled axes and electric bending axis. - 4+4 different bending radii in the same cycle for tubes with diameters from 6 to 18 mm. - 2+2 different bending radii in the same cycle for tubes with diameters from 20 to 30 mm. - Creation of particularly complex geometric shapes. - Mixed bending: fixed and variable radius - Interactive three-dimensional graphic programming on touch screen - Analysis of the feasibility of the piece on the video, with automatic verification of any collisions of the machine and the tube. - Automatic simulation of all alternative processing cycles to verify both the feasibility of the piece and Crelq Ag Hswa T Nrohjb the evidence of the optimal cycle in terms of time and costs TECHNICAL DATA TUBE BENDING MACHINE WITH RIGHT AND LEFT BENDING DIRECTION AND INTERACTIVE THREE-DIMENSIONAL GRAPHIC PROGRAMMING. Bending capacity for: round tube R=450 N/mm2: max. 30x2 mm round tube in Ot - Al- Cu: max. 35 mm metal wire: max. 18 mm Internal bending radius (reducible or increaseable on request): min. 22 max. 120 mm Useful length from die center to gripper edge: 1620 mm Useful length from die center to core extractor: 2700 mm X, Y, Z, R axes accuracy: ±0.05 mm/° X-axis positioning speed: 2000 mm/sec (with brushless motor) Y-axis bending speed: 300°/sec (with brushless motor) Z-axis rotation speed: 900°/sec (with brushless motor) Q-axis positioning speed: 800° mm/sec (with brushless motor) R-axis positioning speed: 300°/sec (with brushless motor) Hydraulic pressure: max. 160 bar Noise level: 65 dB (A) Installed power: 12 kW Controlled axes: No. 5 Total weight: 2500 kg Not including matrices

Condition: excellent (used), Rotary table for work centers Crslq Aowb R Ubsg Hhob

Condition: excellent (used), Year of construction: 2001, sheet thickness steel (max.): 2 mm, working range: 1,850 mm, sheet thickness (max.): 2 mm, bending length: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Cjlq Ag Hjwb E Uvohorb Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: ready for operation (used), back gauge: 1,000 mm, sheet thickness steel (max.): 10 mm, total height: 2,110 mm, total length: 4,330 mm, power: 21 kW (28.55 HP), workpiece length (max.): 3,100 mm, net weight: 10,000 kg, total depth: 2,200 mm, elektrische achteraanslag Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x Crelqsv Taiao Ag Hhob

Condition: good (used), punching pressure: 36 t, – Capacity: 36 tons – Hydraulic – 3 stations – Foot operation Crolq Agowdg Ipj Hhob – Lighting – Emergency stop – 400V

Condition: new, Year of construction: 2024, Professional CO2 laser with a 1600mm x 1000mm work table and a tube with a rated power of 150W reaching 168W at peak! The standard equipment includes a CW5200 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Working Area: The 1600x1000mm table allows you to work with large and complex projects. Laser Power: Rated power of 150W, reaching 168W at peak! This is a guarantee of fast and precise operation. Cooling and Efficiency: Equipped with a CW5200 liquid cooler ensuring optimal working conditions and a compressor for blowing the lens and material. Crslq Ag Hotvmnqshsb Modern Technologies: Ruida RDC6445S controller and support for many graphic formats, WiFi and USB interface, and color separation. High Precision and Repeatability: Thanks to precise stepper motors and linear guides from LEADSHINE and the ability to work in 2500DPI resolution. Versatility: Excellent effects in engraving and cutting materials such as acrylic, wood, textiles, leather, plastics and much more! Exceptional Standard Equipment: PURI 150-168W laser tube, smoke extraction, steel honeycomb table, and blower compressor. Advanced functions, high quality of workmanship and a wide range of possibilities make our CO2 1610G laser not only a work tool, but also an investment in the future of your business! Model: 1610G Working area: 1600x1000mm (Y-axis pass-through table) Rated laser power: 150W Peak laser power: 168W (!) Laser tube type/type: Glass CO2 laser tube Cooling type: Closed-loop water cooling - CW5200 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 25mm depending on the material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445S - a module with advanced functions providing advanced control over the parameters and processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 150-168W laser tube Fume extraction and piping CW5200 cooler Table knife Rigid, stable steel honeycomb table Blowing compressor

Condition: new, Year of construction: 2023, Roll Form Lines enable serial production of the profiles from Coil. Bosporas Machinery Manufacture lines according to Customer's request of profile. Bosporas is able to produce with Quick Cassette Change, Flexible Punching, Auto Width Adjustment options. Some of the Profiles we are experienced with: C - U - Z Profiles GUARD RAIL PRODUCTION LINES C, U, Z, AND SOLAR PANEL PROFILE PRODUCTION LINE LOGISTIC WAREHOUSE TRAVERSE PRODUCTION LINE CABLE TRAY PRODUCTION LINE MARKET SHELVING PRODUCTION LINE SUSPENDED METAL CEILING PRODUCTION LINE SOLAR FRAMING AND RACKING PRODUCTION LIGHTING FIXTURE BODY AND LID PRODUCTION LINE PANEL RADIATOR TOP AND SIDE COVER PRODUCTION LINE METAL GRID AND PLANKS PRODUCTION LINE METAL DOOR AND DOOR FRAME PRODUCTION LINE PVC WINDOW GYPSUM BOARD PROFILE PRODUCTION LINE AGRICULTURE AND ANIMAL HUSBANDRY PRACTICES Crslq Ajh Dz Hajg Hhsb AGRICULTURAL VEHICLE APPLICATIONS PAINTING PLANT PANEL PRODUCTION LINE AUTOMOTIVE INDUSTRY APPLICATIONS COIL PUNCHING APPLICATION HOUSEHOLD APPLIANCES INDUSTRY APPLICATIONS

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Technical Description – SERTOM EMO 15-60 (Year of Manufacture: 2007) 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: SERTOM (Italy) Model: EMO 15-60 Year of manufacture: 2007 Condition: Excellent SIEMENS SIMATIC control panel Main Technical Data: Plate length – upper roll: 1550 mm Plate length – side rolls: 1550 mm Diameter of upper roll: 590 mm Diameter of side rolls: 480 mm Maximum opening between rolls: 285 mm Working height of side rolls from floor: 1620 mm Maximum load on upper roll: 6900 kN Geometric Features: Roll rotation speed: 2.5 – 5 m/min Transmission speed of upper roll: 200 – 430 mm/min Total installed power: 75.2 kW Voltage / Frequency / Phases: 380 V ±10 %, 50 Hz, 3~ Machine weight: 52,000 kg Machine dimensions (L x W x H): 600 x 360 x 320 cm Additional Functional Data: Usable length of upper roll: 2100 mm Usable length of side rolls: 2100 mm Bendable sheet thickness: not specified Roll rotation speed: 2.5 – 5 m/min Functional diameter of upper roll: 320 – 280 mm Diameter of side rolls: 370 mm Working height of lower rolls from floor: 1138 mm Hydraulics & Lubrication: Pump motor power: 37 + 7.5 kW Max. operating pressure (high): 215 bar Crelq Agewg Sdzs Hheb Max. operating pressure (low): 150 bar Hydraulic oil type: Mineral oil Hydraulic tank capacity: 700 l Lubricant type: Grease Lubricant tank capacity: 1.5 l Support Devices: Side support – max. load: 2 x 25,000 kg Upper support – max. load: 44,000 kg You want to see video of machine running under power? Contact us in WhatsApp.

Condition: used, Year of construction: 2017, Trumpf TruPule 203 Laser Voltage: 380 V -10% to 460 V +10%, 3-phase AC + PE Protection Class: IP 54 Power: 10 kW / 16 kVA Current: 23 A Frequency: 50 to 60 Hz Weight: 500 kg Short-Circuit Current Rating (SCCR): 5 kA Wavelength: 1064 nm Output Power (Pulsed): 200 W Crolq Agjwa Stcj Hhob Pulse Energy: 55 to 90 J Pulse Width: 0.3 to 50 ms Repetition Rate: 833 Hz Beam Divergence: 12 mrad Peak Power: 6 to 8 kW Fiber Diameter: 300 µm

Condition: ready for operation (used), total height: 2,690 mm, throat depth: 400 mm, operating speed: 10 mm/s, travel distance Z-axis: 215 mm, controller manufacturer: Cybelec, power: 15 kW (20.39 HP), net weight: 15,600 kg, passage width: 3,750 mm, lower hydraulic clamping hydraulic crowning Y1 / Y2 / X / Z1 / Z2 / V Beyeler system R tooling Capacity: 200 ton x 4100 mm Cslqjv Tai Ho Ag Hhorb Backgauge: CNC Max distance between table -- ram: 342 mm (472 mm if converted to amada systemtooling) Locking speed: 200 mm/sec

Condition: good (used), Year of construction: 2000, Section steel shear with punch Manufacturer: Muhr and Bender Type: KLS 1100 Year of manufacture: 2000 Punching capacity: 110 tons Diameter x sheet thickness: 40 x 22 mm Thrust: 500 mm Maximum hole diameter: 80 mm Cslqevwdn Ie Ag Hhorb Maximum cut-out thickness: 22 mm Weight: approx. 5,500 kg 170425ä

Condition: new, Year of construction: 2024, Professional CO2 laser with a 1300mm x 900mm work table and a tube with a rated power of 150W. The standard equipment includes a CW5000 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Working Area: The 1300x900mm table allows you to work with large and complex projects. Laser Power: Rated power 150W. Cooling and Efficiency: Equipped with a CW5000 liquid cooler ensuring optimal working conditions and a compressor for blowing the lens and material. Modern Technologies: Ruida RDC6445G controller and support for many graphic formats, WiFi and USB interface, and color separation. High Precision and Repeatability: Thanks to precise stepper motors and LEADSHINE linear guides and the ability to work at 2500DPI resolution. Versatile: Excellent engraving and cutting results in materials such as acrylic, wood, textiles, leather, plastics and more! Exceptional Standard Equipment: PURI 150W laser tube, smoke extraction, steel honeycomb table, and blower compressor. Advanced functions, high quality workmanship and a wide range of possibilities make our CO2 laser 1390G not only a work tool, but also an investment in the future of your business! Model: 1390G Working area: 1300x900mm (Y-axis pass-through table) Rated laser power: 150W Tube type/laser type: Glass CO2 laser tube Cooling type: Closed-circuit water cooling - CW5000 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 25mm depending on the material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445G - a module with advanced functions providing advanced control over the parameters and processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 150W laser tube Fume extraction and piping CW5000 cooler Table knife rigid, stable steel honeycomb table Blowing compressor Cjlqstvmlcs Ag Hherb Machine designed for cutting and engraving in materials such as: Acrylic, leather, rubber (e.g. stamps), wood, wood derivatives, plastics, textiles, clothing, leather, glass (engraving only), marble/stones (engraving only, cardboard, ceramics (engraving only), paper, etc., coated metals (e.g. pens).

Condition: good (used), Year of construction: 1988, Bending machine, folding machine, swivel bending machine, die bending machine -Handover: in the current condition as viewed -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET folding machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected load: kW -Dimensions: 1540/3350/H1510 mm Crslq Agov Tpxqe Hhsb -Weight: 3900 kg

Condition: good (used), Year of construction: 1999, operating hours: 10,500 h, Functionality: fully functional, machine/vehicle number: HFBO1033R990221, Approx. 10,450 operating hours year of manufacture 1999 S/N HFBO 10 33 R990221 400 V // 50 Hz // 9 kW max. pressing force: 1,000 kN max. stroke: 200 mm stopping time: 60 ms stopping distance: 6 mm Machine comes with accessories. Condition: Good and ready for re installation. Crolq Ag Hswg Sa Ajhob

Condition: used, Year of construction: 2025, Laser power: 30000 Watt Working range laser: 28000 x 4000 mm positioning speed X/Y/Z: 0,1 mm / 10m Max. workpiece weight: 30000 kg Max. steel: 60 mm Max. stainless steel: 50 mm Cjlq Ag Hjv U A Nxohorb Max. aluminium: 40 mm Max. copper: 20 mm Max. brass: 20 mm Length: 35500 mm Width: 11000 mm Height: 3000 mm Machine weight: 45000 kg

Condition: ready for operation (used), total height: 2,900 mm, total length: 3,700 mm, travel distance Z-axis: 280 mm, controller manufacturer: Delem DAC-310T, power: 30 kW (40.79 HP), net weight: 17,000 kg, total depth: 2,000 mm, Jean Perrot APH 300 ton x 3100 mm CNC Crelq Ajv S Ancjg Hhob Capacity: 300 ton x 3100 mm Backgauge: CNC

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 7 - 12 Hub/min back stop - adjustable max. 1000 mm traversing speed 200 mm/sek work height max. 840 mm down holder 14 Stück Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l engine output 45.0 kW voltage 400 V weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length Crslqsv Tqp Rs Ag Hhsb * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: new, Year of construction: 2024, Professional CO2 laser with a 600mm x 900mm work table and a tube with a rated power of 80W reaching 90W at peak! The standard equipment includes a CW5000 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Model: 6090G Working area: 600x900mm (pass-through table in the Y axis) Rated laser power: 80W Laser power at peak: 90W Tube type/laser type: Glass CO2 laser tube Cooling type: Closed-circuit water cooling - CW5000 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 15mm depending on material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445G - a module with advanced functions providing advanced control over parameters and the processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Crslq Agstvmh Ds Hhsb Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 80-90W laser tube Fume extraction and piping CW5000 cooler Table knife rigid, stable steel honeycomb table Blowing compressor Power source: 230V, 50-60Hz Working environment: Temperature 0-45oC, Humidity 5-95% (non-condensed) Weight 209.65 kg + accessories ~ 20 kg Dimensions: 142x120x105 cm Machine designed for cutting and engraving in materials such as: Acrylic, leather, rubber (e.g. stamps), wood, wood derivatives, plastics, textiles, clothing, leather, glass (engraving only), marble/stones (engraving only, cardboard, ceramics (engraving only), paper, etc., coated metals (e.g. pens).

Condition: good (used), Year of construction: 1989, Bending machine, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 Crolq Aemiqm Isg Hheb -Drive: hydraulic -Max. working width: 2000 mm -Max. sheet thickness: 2 mm -Connected load: 2.2 kW -Dimensions: Bending machine 2850/1100/H1400 mm / Unit 720/540/H760 mm -Total weight: 2160 kg

Condition: used, Year of construction: 2025, Laser power: 12000 Watt Crjlqjv U A I Ij Ag Hhsb Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min max. Positioniergenauigkeit X,Y-Achse: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: ready for operation (used), total height: 2,800 mm, total length: 4,000 mm, throat depth: 400 mm, operating speed: 7 mm/s, retraction speed: 70 mm/s, controller manufacturer: Elgo, power: 15 kW (20.39 HP), net weight: 12,000 kg, passage width: 3,050 mm, total depth: 2,200 mm, 3 axes: Y1 / Y2 / X Manual bombation (V) with digital readout Upper system tooling Laser security (in front and behind) Bending depth backgauge with Elgo CNC Capacity: 200 ton x 3600 mm Crslsv S Aptoq Ag Hhsb Backgauge: CNC Locking speed: 80 mm/sec

Condition: used, Year of construction: 2025, Laser power: 12000 Watt Cslqev Uz Tie Ag Hhjrb Working range laser: 4000 x 2000 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 3000 kg Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. brass: 20 mm Length: 12500 mm Width: 3650 mm Height: 2620 mm Machine weight: 18000 kg