Condition: new, Brand new tandem press line ISGEC from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Ibjdpfeihfwtex Agzef

Condition: good (used), Manual spindle press 25 t Ibjdpex Haprjfx Agzsf - Clearance between columns: 400 mm - Spindle diameter: 80 mm - Vertical opening: 420 mm - Various clamping brackets Dimensions: LxWxH 1.2x0.8x2 meters / Weight 700 kg Subject to errors and omissions.

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm Ibjdpfoi Amnpjx Agzef width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: not inspected (used), functionality: unexamined, pressing force: 100 t, table width: 460 mm, table length: 460 mm, type of input current: three-phase, travel distance Z-axis: 570 mm, pressure: 400 bar, input voltage: 400 V, 1 Hydraulic Press MUNARRIZ ; Maximum pressure: 400 bar Ijdpfxsxt Hzfj Agzjbf Table dimensions: 460 x 460 mm Presser diameter: 180 mm Cylinder diameter: 180 mm Approximate vertical stroke: 570 mm Manual drive Hydraulic pump IHBER; YOM: 2024 Included a J.ANGEL BACAICOA weightless manipulator Power of the pump motor: 15 kW Dimensions: 2900 x 2300 x 3000 mm Approximate weight: 1500 kg The machine has been working until May of 2025. Actually is dismounted and can not be tested. No warranty. The machine was reformed on 2024. All the hydraulic group was replaced by a new by the company IBHER in 2024 If the potential purchaser wants to see the machine operating this has a cost of 1.500 Euros ( Taxes not included )

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50 /92-NG 600/15 kW/32Liter, pressing force: 130 t, operating speed: 80 mm/s, overall weight: 3,500 kg, Hydraulic straightening press Manufacturer: G +K Year of manufacture: 1992 Max. pressing force: 130 t Lower table size: 800 x 500 mm with T-slots Upper table size: 800 x 500 mm with T-slots Installation dimension: 1000 mm Iodpsxr Rnasfx Agzsbf System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 V AC, 24 V DC

Condition: excellent (used), pressing force: 5 t, I sell a Schling DUO 5T pneumatic press. Ibedpfsudph Uex Agzof

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Isdpfx Agehtaaqjzjbf Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: good (used), Four-column Press SP 60 / 670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons - Clearance between columns: 670 mm - Side clearance between columns: 400 mm Ijdpfx Asx Halysgzsbf - Table size: 900x750 mm - Vertical opening (daylight): 520 mm - 6x T-slots in the upper beam - 6x T-slots in the table Dimensions: LxWxH 2x1.5x2 meters / Weight 3000 kg Subject to errors and omissions.

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial number: 54203/05G Ibsdpfox Ea Shsx Agzef Year of manufacture: 1999 Pressing force: 1,000 kN Stroke adjustment: 8 - 140 mm Ram strokes: 50 – 180 strokes/minute Location: 41751 Viersen, Germany Condition: Used, functional Price: €36,974 net / €44,000 gross You are welcome to submit a price offer. Reasonable counteroffers will be considered. When making inquiries, please include your complete contact details. Additional photos available upon request. You are also welcome to view the machine on site. Simply call us to schedule an appointment. This item is being sold as part of insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. Sale is made without any warranty. Liability, reduction, and rescission are expressly excluded. We recommend inspection prior to purchase, as the item is sold as seen. All information provided is without guarantee. Subject to errors and prior sale. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of any liability for visible and hidden defects, in particular technical, qualitative, or performance-related defects and usability. Due to time constraints, only serious inquiries and reasonable offers will be answered! This is solely an advertisement for informational purposes. Inspection by appointment only! Best regards

Condition: used, Year of construction: 1966, functionality: unexamined, punching force: 240 t, We are selling a Weingarten PS180 press here. According to the nameplate, it has a punching force of 240 tons. We purchased the press as fully functional approximately 20 years ago, but it has never been connected or put into operation since the intended project for this machine never materialized. Therefore, the coupling elements, control cabinet, and air reservoir remain dismantled, but everything is complete. As a result, on-site demonstration is of course difficult. Ijdpfsx Ei Iusx Agzebf

Condition: good (used), Year of construction: 1993, functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN throat depth 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Weight approx. 2.5 tons Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m Ibedpfx Ajx Hfc Rogzsf . Equipment and scope of delivery : . Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: good (used), Year of construction: 1989, functionality: fully functional, Revision 1989 Pressing force: 2x200 kN, Strokes: 40 - 300 strokes/min. Stroke: 50 mm, Clutch: pneumatic, Power supply: 380 V, Machine weight: 2,200 kg, additional ejector, factory version with reinforced design Ibodpsxx T Hfjfx Agzof

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Iodpfx Agsf Rt Ubszobf

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP Ibodpoumk Naefx Agzsf General: Display: 0-400kp/cm2 / 0-25Mp

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm Ijdpfxeu Nfhdj Agzebf clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Ijdpfex Ehmyjx Agzobf

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Ibsdped Ntd Dofx Agzsf Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm Iodpfx Agsu N Dfhszebf no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: repair required (used), Year of construction: 1972, functionality: limited functionality, machine/vehicle number: 611, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Iedpfx Aox Ehlcsgzobf

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Ijdpfx Asu N A U Ijgzobf Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. Iodpfx Agou Nfg Hezjbf *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm Ibedpfxsu Nfn Ro Agzof clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Ibodpsu Icwtefx Agzjf Sale as is. *

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m Iodpfxeu Nfhqo Agzjbf - via two hand control - copy of documents digital available Machine can be demonstrated under power. *

Condition: used, Technical details: pressure: 80 t Iedsu Nfnwopfx Agzebf dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *